Answer / vimal kishor

For this we can first calculate the U/L.

i.e. engine produces 30 units by 10 litters.

then U/L= 30/10= 3
SO, 30 KWH Produce by 10 litters diesel.

now PF= KWH/KVA,
Hence.. KWH= KVA*.8,
SO U/L= KVA*.8/Diesel Consume,
so, Diesel Consume per KVA= .8/(U/L),

Answer / shantosh

Diesel consumption =(150*bhp)/(1000*.84)
150 is diesel in grams/bhp/hr.
.84 is specific gravity of diesel.

Answer / adel

we can not calculate diesel by watts

what is the reason for using 110 volt and 60 hertz ac supply for using power distribution in America?

2 Answers   Electro Tech,

---

Is a induction motor rotate by back emf ? If not , then how it is rotate ?

1 Answers  

---

advantage and disadvantage of team work?

0 Answers   Ethio Telecom,

---

How does frequency affect KVA rating of a transformer? If a 500 kva, 500 to 250 v, 60 hz t/f used in Canada is to be operated on 50 hz in Europe frequency then how will its KVA rating change? a-increase b-decrease c-remains same

1 Answers  

---

Can you tell me more about pu systems (per unit systems )calculation in large power systems? how to get the base for voltage and power in generator, transformator and transmission lines?

0 Answers  

---

when i am going to take trail on a 3ph sq.i/m motor 5.5kw, i observed that RPM of the motor is very low as compared to the rated RPM and also it rotates in clockwise in first ON command,and anticlock wise in second ON command. finally i observed that on phase is no available . but iam not clear about, why the motor is rotates in both directions without any phase interchanging.pls answer to my question.

1 Answers  

---

what is a difference berween line voltage and phase voltage?

2 Answers  

---

how to calculate the size of cable for 100 kva load,?can somebody tell me with a formula

7 Answers   Havells,

---

when we r using 3.5 cable for a bldg. and put laod on each phase using the neutral and neutral is the return paht for the phase so the current of the neutral must be Ir+Ib+iY (return).But the size of the netural is .5 as comper to the phase.

2 Answers  

---

What is the technical formula to calculate the load taken by a motor in Amperes ?

2 Answers  

---

Whether earthmat designning is done only for sub station or it can be done for multy residential complexes also? What is the size, type & arrangement of the earth grid to be done?

1 Answers  

---

Relation between Sq.mm of wire and Its current carrying capacity?

5 Answers  

---