what is the difference between LT and HT power supply?
Answers were Sorted based on User's Feedback
Answer / suresh
LT (LOW TENSION) SUPPLY HAVING VOLTAGES OF 415V, 11KV.
HT (HIGH TENSION) SUPPLY HAVING VOLTAGES ABOVE 11KV LIKE 33KV, 132KV,400KV.
SIMPLY FOR BIG INDUSTRIES THE SUPPLY VOLTAGE FROM GRID IS HT LINE AND THEY WILL STEP DOWN THE VOLTAGE TO LT IN LOCAL SUBSTATION.
| Is This Answer Correct ? | 12 Yes | 2 No |
Answer / himanshu
LT power supply up to 415 volt, where as HT power supply is
above 415 volt & up to 220 KV and above 220 KV it is EHT.
| Is This Answer Correct ? | 12 Yes | 4 No |
Answer / akhilesh noida
LT low voltage high current
HT high voltage low current
| Is This Answer Correct ? | 9 Yes | 2 No |
Answer / yunus pinjari
Electrical power is generated in DC and while transfer this
power to customer/ user from generating station to ultimate
user the voltage get highly drop down, therefore it is
converted in to Alternating current ( AC) and then transfer
from generating station to ultimate user in distance while
the voltage get drops down we use transformers for stepping
up the voltage suitable . Therefore while transfer energy it
is High voltage ( i.e. HT ) and distributing to user this
high voltage is stepped down to suitable Low Voltage (i.e.LT
) e.g. 110v, 240v, 440v.
Differance...
HT lines LT lines
1)used for distribution
1)Use for transmitting to user.
energy from one point
to other .
2) Transformer requires to 2)no transformer require
maintainvoltage
3)Due to high voltage 3) Suitable voltage for
no user can consume energy user requirement
directly
| Is This Answer Correct ? | 7 Yes | 2 No |
Answer / santosh chavan
Please share the details of HT LT current diffrence
HT Current 33KV-
LT current-
| Is This Answer Correct ? | 4 Yes | 1 No |
Answer / adnan kauchali
Low tension(LT) transmission equals upto 650 volts in India.
rest above is HT.
| Is This Answer Correct ? | 6 Yes | 4 No |
Answer / shashi
LT means the Voltage ranges bellow 1100volts(i.e 1.1kv).
HT means the Voltage ranges from 1.1kv and above likely
6.6kv,11kv,22kv,33kv,66kv,132kv.
| Is This Answer Correct ? | 6 Yes | 4 No |
Answer / muhtukrishnan
nsion is a French word for Voltage. A low-tension line is a low voltage line and a high-tension line is a high voltage line. In India LT supply is of 400 Volts for three-phase connection and 230 Volts for single-phase connection. High tension or HT supply is applicable for bulk power purchasers who need 11 kilo-Volts or above. Most small consumers of electricity like individual houses, shops, small offices and smaller manufacturing units get their electricity on LT connection. HT is applicable for bulk purchasers of electricity like industries (big manufacturing units), big offices, Universities, hostels and even residential colonies (if the apartment complexes purchase together in bulk). The tariff structures of most state distribution companies are different for LT and HT.
| Is This Answer Correct ? | 2 Yes | 1 No |
what is the sludge current
wat s the electronic device used in the fan regulators recently?
From stability point of view,What(higher/lower) should be the value of inertia constant of rotating machines?
No load test of induction motor is carried out to compute= A stator resistance B rotor resistance C magnetizing reactance D rotor reactance
what is buscoupler adopter panel????
The capacity of the transformer is 20/25 MVA, Ratio is 132/11 KV, Vactor group YNyno. and impedance is 10.07%. As per the calculation the secondary current is 1312.2Amps. The maximum fault current the transformer should sustain is 13.030KA. How many times the transformer should sustain the maximum short circuit current of 13.030KA over a period up 1 Year. The transformer is repaired one & 10 Years old.
calotropis is an example of the following phyllotaxy
How to calulate Voltage Drop for perticular lentgh of busbar (Cu/ Al)?
How it can worked plc based electrical system And which type of software using.
how to select short circuit current while selecting a MCCB? how to calculate current for a given KVA and KW load?
2 Answers GE, PnU Engineering,
I have 440v power coming to facility,( not being used ) can I buy large generator, (gas) to sell power back to electrical co.
what is meant by reactive power ,active power & real power ? thank you
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)