Answer / mohammedazhar uddin

for the grade m20 the cement per 1cum is 320kg
so the quantity is calculate in this manner
1000*4"=9.42 cum
then 9.42*320=3014kg 1bag= 50kg than
3014/50=60.2bags

Answer / raghav gowda

for 1000sqft slab of 4" thk.
assume for M20 grade of 350kg cement for 1cum of concrete is
first convert the 4" thk to feet i,e 4/12= 0.333'
then, 1000x0.333= 333cft
convert 333cft to cmt i e, 333/35.28=9.438
for 9.438cmt of concrete cement required is 9.438x350=3303.3kg
then convert it in to bags
3303.3/50=66.066bags
so the cement reqired is 66.066bags.

Answer / nissar ahmed

60 bags is required for 1000sq.ft. slab

Answer / ashwini

If the grade of concrete is M25 and 330 KG cement per cubic
meter of concrete. Then the answer is 61.31 bags of cement
is required.

Answer / dharmendra barot

For  1000 sq ft  4"thick use   M20 (1:1.5:3)   for  cement required 71 bags

Answer / sayeedabdulshaikh

60 bags of 50kg

Answer / amit dutta

65 bags are require for 1000 sq.ft slab.

Answer / somu

1000 Sq.ft= 92.9 Sqm
4 inches= 0.1 m

volume= 92.9*0.1= 9.29 Cum
M20 Grade
Cements bags= 0.29*(0.46/1.5)*1440=4102.464kgs/50 kgs= 82 Bags

Answer / sindhu

If grade is M10 (1:3:6), cement in kgs per cum is 266kgs
1000 sq ft
4 inches=4/12=0.33ft
1000*0.33=330 cft
330/35.315(1 cum= 35.315 cft) = 9.344cum
9.344*226(cement in kgs per cum) =2111.85 kgs
2111.85/50(per bag) = 42.23 bags

Answer / remesh babu pillai .k .p

Theoretically -61.3 bags .practically it comes 55.8 Bags

Cost control in civil construction as well as Quality control

11 Answers   Reliance,

which grade of cement is more suitable for construction..? and why.?? what is difference between 33, 43 and 53 grade cement..?

1 Answers   L&T,

 Describe a time when you anticipated potential problems and developed Preventive measures

0 Answers   Graham Construction,

i) Distinguish between Theodolite and dumpy Level? (Marks-8) ii)Distinguish between Viscous and Turbulent flow? (Marks-8) iii) Distinguish between nominal and design mix? iv) What is standard sand? v) Explain the term plane stress? Vi) Differentiate between principal plane and principal axis? Vii) write short notes on Elastic limit of structural steel? viii) Write short notes on stress concentration? ix) write short notes on "Grading of Sand" ? x) How many grades of concrete are there under standard concrete?

0 Answers   Public Service Commission,

How can explode a block?

0 Answers  

how to calculate load for a bungalow and 1column carry how much load if the size of column ,9"*15" .....or total structure load......

0 Answers   Vishwakarma,

In reclamation works what are the importance of geotextiles and sand?

0 Answers  

How to find Weathering Course Material

0 Answers  

What are the applications of the modulus of elasticity?

0 Answers  

where i can get material costs on weekly basis

0 Answers  

Dear I would like discuss in deep beams problem in design and serviceability. please contribute to prepare a comprehensive discussion. first deep beam definition:

1 Answers  

why we always consider Bulkage due to the voids only for the Fine aggregates not for the Coarse aggregates

3 Answers