why nutral and earthing wire connect with each other in
main panel board.?
Answers were Sorted based on User's Feedback
Answer / sagar soni
if in any circuite there will be leakage current than it
would return back via neutral and it is harmful to the
circuit and if earthing is provided that leakage current
passes via earthing without any harmfull to the circuit and
equipment.
Is This Answer Correct ? | 2 Yes | 0 No |
Answer / asad ali
To provide zero potential to the nutral, we connect earth &
nutral together in any of the ckt....
i got this answer but do u think it is good idea??
because as i know in every grid station a meter is
connected with each feeder, so if cct return current is not
coming back to this meter and going inside the earth
through netral to earth link in panel then how this meter
in substation works????
Is This Answer Correct ? | 1 Yes | 0 No |
What is the need of black rock stones under the transformer yard?
5 Answers TNEB Tamil Nadu Electricity Board,
why should be the frequency is 50 hz only why not others like 45, 95 56 or anything , why should we maintain the frequency constant if so why it is only 50
what is the diffrence between preventive maintinance corrective maintinance?
What is time invariant system?
Can the output voltage of a rectifier be greater than the input AC voltage without the use of any voltage multiplier in the circuit??please provide the explanation too..
i have a Connected Load of 280KW and Maximum Demand of 224KW to one of SMDB under design with me. which criteria should i consider to design panel and main cables connected Load or Maximum Demand 1)Breaker rating 2)Panel Busbar rating 2)Incommer cable sizing (ignore Voltage drop)
How we calculate DC inducation moter Amp? Sir pls give me formula......
How seriving & testing of the HT & LT breakers are done. What are the standard Ir values on which we can come to know the test is passed or failed?
Salient pole alternator is more stable, why?
Dear sir, In our plant have Station Transformer having capacity,i want to know, why LV side 40 - 40MVA is given? & how we can get 6.3 KV supply from tertiary(i.e. Open delta connection), Vector Group YNyn0 - yn0 +d MVA Rating 80MVA / 40 - 40MVA + 26.7MVA Voltage rating 420 (Tap range +6,to -10)81.25% /11.5KV - 11.5KV +6.3KV
howmany electrician should maintain for a 1000 kva used plant... in kerala..
WE are using a 63A MCCB(SIEMENS MAKE) for one of the feeder in LV substation panel.It is supplying to a lighting & power socket DB.Settings in the MCCB is Ir = 63 * 1 , Isd = 8 times of Ir , tsd = 0.5 sec( I2 t off). Sometimes this MCCB is tripping .But no trip in DB MCB. Can anybody tell me reason ? From where i can know about the MCCB settings?