Answer / duraiarasu

as per Faraday law of electromagnetic induction whenever
conductor cuts magnetic field emf will be induced in it
in ac emf whereas in dc mm f hence ac only can be generated
in ALTERNATORS BUT THERMOCOUPLE AND SOLAR ARE DIFFERENT

Answer / prakash

according to Faraday law of electromagnetic induction emf is
produce when a conductor cuts the magnetic field.
But hear due to the rotation of magnetic field the pole is
not constant so we get the emf pulse ie ac
example- we get ac 50hz ac by 50pair of pole changes per second.

Answer / ravinder

dc is nt genrated becoz
1.induced emf is ac if v use brushes to convert it to dc den there would be more losses,sparking etc.so due to dis we nt use genrete dc
2.effeciency of the system dec as there are more losses.

Answer / t swetha

for the generation of the emf ther must be a relative
motion between the conductors and field.then the resultant
is having the positive and negative half cycles so ac is
generated and it can be converted to the DC by an alternator

what will be fault level of 11 KV , 2000 A ELECTRICAL SYSTEM?

4 Answers  

---

is there any difference in reading or error in value, if we connect the R phase in Y terminal and Y phase in R terminal of electronic energy meter of 11 kv feerders???

1 Answers   KSEB,

---

Why do we generate 3 Phase AC Supply? It is possible to generate 4 Phase and 5 Phase explain it?

3 Answers  

---

ratings of lightning arrester

0 Answers   Bajaj,

---

What will be the direction of rotation of a Alternator in case it goes in motoring action when connected with grid ?

6 Answers   DVC, NTPC,

---

How to differentiate 220 Kv & 132 Kv line transmission tower if there are no specifications given on towers?

3 Answers   Karam, Power Grid,

---

in 33/11kv stepdown transfomer, transformer will stepdown to 11kv & remaining 22kv where it will go..

3 Answers  

---

in alternator how we can give power to rotor ? its power is AC or DC ?

5 Answers  

---

do we convert single phase line to three phase at minimum cost?

1 Answers  

---

what happens in the primary side of the transformer if transformer is short circuited first and increasing the resistance of the short circuit gradually?

3 Answers   Emerson, IIT,

---

when we increased the current what do ?

0 Answers  

---

we have a 2000kva step down transformer at our site. The HT side is charged from 22000V. So the primary current will be 52.48A. So why the HT breaker(SF6 ABB) is rated of 1250Amps ?

2 Answers  

---