Answer / amit

high tension breaker which is used for the high tension
line.

Answer / mrt

ht breaker means high tension breaker which is used for
more than 3.3kv lines. HT breaker is used to make or break
the supply.

Answer / j.s.saini

ht breaker is used to isolate high voltage line.

Answer / p.murugan d.eee,b.e(e.e.e)

HT breaker means on and off switch for HT voltage 11kv,33kv,....VCB,SF6 its HT breakers. HT breakers installed between consumer HT YARD and transformer.Reason for installed ht breakers any problem in case for transformer burning or transformer oil temperature, transformer winding temperature value,short circuit immediately commend process going to HT breakers then tripped HT breakers.HT voltage for 11000,33000,22000,...voltage so breakers on and off time over spark coming this spark reducing purpose vacuum,sf6 gas HT breakers particularly used. YOUR NOT USED HT BREAKERS handled not for easy in transformer and LT side all electrical equipment and HT side electrical parameter noted not for easy HT voltage, amps, kwh, kva,power factor, kvar,setting for sanctioned demand, alarm relay. setting.

Answer / naresh l patel

HT breaker is used to make or break HT supply. Breaker is
required to prevent arc during while breaking of supply.

Answer / ati

its a ht breaker used to make and disconnect HT lines above
3.3kV; with extra protections

Answer / aakash

Ht breaker in use in ht line and installed between ht yard to transformer resone for installed becaude any in case of transformer burning and oil tamperature,short circuit

Answer / shimla

HT breaker is like a switch only which we use to break and
make the supply (more than 415V) according to the
requirement.It use to be installed before transformer. It
has some extra safety as compair to other switches.

How to design power source say 5KW i/p :415v 3 ph, o/p 5KW constant, variable currnt and variable volatge 10-230v,

2 Answers  

what is main advantage if motor connected in star or delta?

3 Answers   Essar,

what collector is used for 100kmph-120kmph tracion application?

3 Answers   APTransco,

Which motor has high Staring current A. Series DC motor, B.Induction motor c.Synchronous motor D.DC Shunt Motor

4 Answers   CCP,

In order that work may be done:(a) Two wires are necessary(b) The circuit must have a switch(c) Coal must be burnt(d) A supply of energy is required

1 Answers  

how to calculate knee point voltage for pt?

1 Answers   Amec,

Why do we perform an open-circuit test and short-circuit test on the transformer?

0 Answers  

Input power is 380 - 450 V but with 45 - 55 Hz frequency - desired output is 415 V and 50hz with 1% variation permissible. CVT / Servo dont stabilize the Frequency - what is best solution??

7 Answers   IOCL,

suppose we using 3 phase motor of 440 v means what range of C.T. is require for measuring current ?

9 Answers  

Why it is necessary to isolate fire fighting when you are taking shutdown for lv board.

0 Answers   KSEB, L&T, Siemens,

Can anybody please refer the best and simple book for about Protection relays and in detail of all its protection ?

0 Answers  

power factor is max for which welding a.arc b.resistance c.gas

2 Answers   Bhel, HCL,