what is a lightning arrester???
Answers were Sorted based on User's Feedback
Answer / manthesh.patil
lightning arrester is metallic device which is capable of
conducting electricity, which is placed above the multi
storeyed buildings and transformers and other receiving
stations,sub stations.the main purpose of lightning arrester
is to protect the buildings and equipments from
thunder&lightning during rainy seasons..this device will be
connected to the earth from the top of the building through
a wire,which is capable of sending high voltage into earth
| Is This Answer Correct ? | 32 Yes | 1 No |
Answer / manish kumar meena
Lightning arrester is a protective device which conduct
high voltages surges on the power system to the ground.It
consists of spark gap which is connected in series with the
non-variable resistance,its connection is that one end is
connected to the terminal of the equipment which is to be
protected and other end is effectively grounded.
The property of non-variable resistance is that it offers
low resistance when voltage is high.
| Is This Answer Correct ? | 24 Yes | 1 No |
Answer / ram krishna sarvadhar
This is a human made ystem which protects the external part
of building, tower, Mall etc from lightning which occurs
during thunderstorms, and sometimes during volcanic
eruptions or dust storms, due to an atmospheric discharge
of electricity between cloud to cloud, clouds to earth.
| Is This Answer Correct ? | 20 Yes | 3 No |
Answer / kishore
LA is a non-linear resistor i.e. during normal condition it
offer high resistance but during abnormal condition
(abnormal voltage ) it acts as a low resistor thus allow
the heavy fault current and provide path to ground.
It is pointed one as charge resides/attracted by pointed
object and always placed at top of switchyard/building.
| Is This Answer Correct ? | 18 Yes | 1 No |
Lightning arrester is a device that is used for the
protection of electrcal devices and electrical system e.g at
the power station it is installed at power transformer ,
main purpose is to protect system against lightning impulse
.. it is non linear resistance normally open in case of
lightning impulse it grounds all the voltage and protects
systen against extra high voltage
| Is This Answer Correct ? | 6 Yes | 1 No |
Answer / swetha
Lightning arrester is a protective device which conduct
high voltages surges on the power system to the ground.
| Is This Answer Correct ? | 3 Yes | 1 No |
Answer / kumavat nareshkumar .c.
LA is non-linear resister.LA is installed on transmission
line,transformer and other electrical equipment.LA are used
to protect the equipment against lightning-stroke(high
voltage) and provide path from top to ground so lightning
stroke directly into ground.
| Is This Answer Correct ? | 3 Yes | 1 No |
Answer / niranjan
Lighting arrester is a proctective arrangment which provide
protection against high voltage surge. During lighting and
other condition when high voltage surge genarate then it
provide path for surge through earth.
| Is This Answer Correct ? | 3 Yes | 1 No |
Answer / k.kumar
lightning arrestor is a device which prevents the equipment
and building from voltage surges in any of them it may be
due to any reasons this provides low resistance path to the
electricity on the terminal of the device and top of the
buildings to flow the charge to ground...
| Is This Answer Correct ? | 1 Yes | 1 No |
Answer / benudhar sahu
A protective device for electrical equipment that reduces excessive voltage resulting from lightning to a safe level by grounding the discharge.
| Is This Answer Correct ? | 0 Yes | 1 No |
Alternating voltage and current is which type of quantities?
what is the requirement regarding earthing of Single conductor with AWA
Is corona effect occurs in Induction motor. pl. justify the answer.
where we use stardelta starter and dol starter
For a 500 MVA 400/220/33KV transformer following data given HV power = 500 MVA IV power = 500 MVA LV power = 5 MVA If input power is 500 MVA then how output power is (500+5)MVA. Can anyone help
1 Kva = How many HP
What is the voltage gain or transfer function of amplifier?
which metal use as a electrical shunt?
why we are having many type of vector group in the transformer ,what is the use of it?
HOW CAN YOU CALCULATE PRACTICAL EFFICIENCY OF A ASYNCHRONOUS INDUCTIONMOTOR OF 7.5KW,& MOTOR IS RUNNING WITH AVOLTAGE OF 410 VOLTS,& TAKING CURENT OF 13 AMPS
What is Isolation Transformer???
what is meant by re-rolling motor? how it differs from standard motor?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)