what is chemical engineering?

2 Answers  

---

Question 90 - In the calculation of the growth of bacteria, absorbance, A in spectrophotometry is used. According to Beer-Lambert Law, A = e x l x c where A is the absorbance of the solution (no unit), l is the distance of light travels through the solution (in cm), e is the molar absorptivity or the molar extinction coefficient [ in L / (mol.cm) ]. For a particular solute and fixed path length : As / Ao = Cs / Co where Ao is the observed signal for a known concentration Co, and As is the observed signal for a sample concentration Cs. (a) For a cell concentration of 560 cells / mL, a spectrophotometre gives an absorbance reading of 1.0. A mixture of concentration 3600000 cells / mL can be diluted in several operations, with each operation having a dilution of 1:20. How many dilutions should be made so that the concentration of this mixture can be calculated within a range of A = 0.0 to 1.0. (b) In another experiment, a sample tube of 1 cm in width is used. Let A = 0.06 and e = 0.0012 ml / (cell.cm). Find the cell concentration of the sample.

1 Answers  

---

what is the cast iron grade of composition of c-3.06% , Mn- 0.48% , Si-2.38% , S-0.088% , P-0.092% , Cr-0.12% , Ni- 0.012% , Mo-0.00%

0 Answers   L&T,

---

Suggest the best book for barc written test guide me the syllabus

1 Answers  

---

What is the method of determining maximum differential pressure during hydro testing of shell and tube heat exchangers?

0 Answers  

---

How does a chemical get ignited without external heat source on reaching its auto ignition temperature

1 Answers  

---

could anyone send me model question papers or outline of graduate trainee(chemical engg) post?

0 Answers   NPCIL,

---

In DM plant, If pH in anion outlet is 7.2 and Mixed bed pH is 6.2, wat could be the reason.

8 Answers   Cipla, Jindal,

---

wt is inhand salary in hpcl as a officer in research and development?????

0 Answers  

---

we have 2 O2/Comb Analyzers Servomex Model 2700 in service for one of the furnaces in our chemical plant. It is giving High Temperature Alarm. Checked Temperature and found it to be 800 Deg C whereas Set Point is 700 Deg c. It is strange why is temperature not at SP. Also response is 23 % with 21 % Inst Air and with N2 reading is not coming down. please clarrify this issuses very urgent

1 Answers  

---

What is the iodine value of spent carbon?How iodine value is used to determine the power of carbon to adsorb?

2 Answers  

---

Question 32 – Let 1 ^ 1 = 1, 2 ^ 2 = 4, 3 ^ 3 = 27. By using the Excel computer programming – either by Solver or Goal Seek, find the value of v for the Van der Waals equation (P – a / v ^2) (v - b) = RT where a = 18.82, b = 0.1193, P = 2, R = 0.082, T = 5000 for benzene. Describe briefly how to use Solver and Goal Seek in Excel program of computer to find the solution quickly.

1 Answers  

---