Answer / natu daiwat k.

bcz by some experument it is proved that at 11kv haronic
influence in the generated voltage is very minimum and due
to our form factor is 1.1 11kv generated voltage is
selected....

Answer / md. rakibul islam

BCZ Harmonic influence of 11kv voltage is low.

why current flows from +ve to -ve terminal

7 Answers  

---

Can anyone tell me what will happen if AC & DC supply get mixed???

9 Answers  

---

on which power factor synchronous motor run

2 Answers   Bhel,

---

What is the standard height of installation of Socket & switch from Finish Floor Level as per the IEC/IS Rules?

1 Answers  

---

in cvt,there are two windings,1a,1n and 2a,2n.in my one project i use only one winding i.e.1a,1n. the other winding is not in use, so i connect it in open delta and want to close it by ibsertibg thermal resistor. the output of cvt is 132kv/115/sqrt3. plesae tell me exact value of resistor, so i may close it to avoid the resonance phenomenin. send me answer on this email adress please. aetcon-po@aetcon.com

0 Answers  

---

How power is transferred from one winding to another in an auto-transformer? A) electrically B) magnetically C( both a & b D) neither of above

3 Answers   ISRO,

---

when i am going to take trail on a 3ph sq.i/m motor 5.5kw, i observed that RPM of the motor is very low as compared to the rated RPM and also it rotates in clockwise in first ON command,and anticlock wise in second ON command. finally i observed that on phase is no available . but iam not clear about, why the motor is rotates in both directions without any phase interchanging.pls answer to my question.

1 Answers  

---

why the indian frequency is 50 hz & U.S.Frequency of 60 hz

3 Answers  

---

How does the sensitive earth fault protection provided by cbct for motor can help in reducing the size of cable used to supply the motor?

1 Answers  

---

What is the acessaries distribution transformer ?

11 Answers   Bhel,

---

How much current can 11KV line carry? What are the formulae used to calculate current across both side of transformer? Moreover I need to know can I connect 33KV line with transformer of 1600KVA? Details are: V=415, Pf= .9

3 Answers  

---

When we are working on transformer(132\11KV). we are going to isolate the transformer from both HV side and LV side. then we are applying grounding on both side. My question is that we required to isolate the VT which is still connected from secondary side.?

1 Answers  

---