What is the main application of DUMMY COIL in machines?
Answers were Sorted based on User's Feedback
Answer / k.prakashchandra
In other words, for 'dynamic balancing'
Is This Answer Correct ? | 11 Yes | 4 No |
Answer / vikas sharma
Bring mechanical balance of the armature..
Is This Answer Correct ? | 6 Yes | 0 No |
Can anybody tell the formula to calculate temparature rise in the cable with respect to current?
what is strip power factor?
i have one transformer 1000kva, 11/.433kv. we are using 200/5 amp. ct unit for measuring purpose, & one 800 amp. V.C.B Unit for the same t/f operate, i wants to known the primary current of T/F is only 53 amp. why we used 800 amp. V.C.B ? & 200/5 amp. CT Unit.
what is the principal of ceiling fan and how it will rotates? what is the magnetic momentum produces inside the fan?
I am new guy as an electrical engr. in a 100MW HFO based power project. I am in operations division. I have noticed from last few days, my supervisor sends the last 24 hours energy generation calculation to my plant manager. I have noticed, he calculated last 24 hour's generated energy differences in KWH then he multiplied it with a multiplying factor 960. for example: total difference =2.685 KWH*960= 2577.6 MWH. but he does not not know what is multiplying factor 960?? can anybody explain it??
If two Transformers are connected in parallel having impedance of 50KA in both transformers will the impedance increase or decrease after connecting transformers in parallel?
what is meant by reactive power ,active power & real power ? thank you
How does the humidity affect in breakdown voltage of air?. Is the breakdown voltage increases with the humidity?
What is float cum boost charging system?
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
why we are using DC supply for all protection relays, why cant we use AC supply..???
DIFFERENCE B/W NEUTRAL AND EARTH?