Interested to Buy Any Domain ? << Click Here >> for more details...
What is mean concrete class c35/20. Here C35 and 20 means?
- 10 Answers
- 159683 Views
- I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / dinesh
c35 stands for design concrete sympol c with 35 N/mm2
& 20 means the size of aggregate used in that mix
| Is This Answer Correct ? | 215 Yes | 53 No |
Answer / shyam sundar
in few instances we mark C35/20. in indicate C35, is
concrete grade or strenght (both same) as 35Mpa in 28 days.
20 is the agreegate size.
in other instances, internationaly they use like C40/50,
which means C40 - Cylinder strength in MPa and 50 is
equivalent Cube strength in MPa
| Is This Answer Correct ? | 156 Yes | 20 No |
Answer / bilal
EC2 classifies the compressive strength of normal concrete
in relation to cylindrical strength measured at 28 days.
C40/50 means concrete specimen having cylindrical strength
of 40 N/mm2 and cube strength of 50 N/mm2.
| Is This Answer Correct ? | 76 Yes | 10 No |
Answer / avaz huseynov
Guestion is not correct - C 35/20.
It will be C32/40, C10/15 .....(New Europan standarts,
concrete class, from 2003 year)
Here first 32 or 10 strength of concrete according with
cylinder test result, 40 or 15 are strength of concrete
according the cube result (N/mm2)
For example C32/40 concrete class old C40 grade. Old C40
also N/mm2 cube (150x150x150)mm test result
All cube result with 150x150x150 mm size of cubes. It is
standart.
| Is This Answer Correct ? | 29 Yes | 16 No |
Answer / dr. p. morton-thurtle
Not quite right. C35 is the crushing strength of concrete in
SI units. It's is a measurement of 35Mpa, which means mega
pascals. 35 therefore means a crushing strength of 35
million pascals per square metre in the mgs system, or 35
million pascals per square metre. A pascal is the SI unit of
pressure and is equal to 1 newton pressure per square metre,
ie, 35 million newtons per square metre. As a metre is a
large area, to reduce to say a mm square, we divide by
1000x1000, which is a million. This gives us 35 newtons per
quare millimetre. To give an idea in imperial measurements,
7Mpa, or C7 concrete is roughly 1,000 psi, or just under
half an imperial ton per square inch, ie, 1000/2240.
C35 is therefore roughly 5,000 psi, or 2 tons per square inch.
C35 is a fairly strong mix and would be used for say a
semi-suspended over site. For form work or strong structural
work, up to C70 can be used.
Posted 14.09.11.
| Is This Answer Correct ? | 25 Yes | 13 No |
Answer / vikranth geddam
please refer BSEN206.
page 20, table-7.
we have two different cases here.for example for C35/20,
35 is characteristic strength or grade or crushing strength and 20 is aggregate size.
how ever, when u refer to BSEN 206,it says 35 is minimum characteristic cylinder strength and 20 is minimum characteristic cube strength.
| Is This Answer Correct ? | 15 Yes | 7 No |
Answer / ross hampton
this is a old description (in UK and europeon standard terms). C35 is the cube crushing strength and 20 is the aggregate size. Strength wise now this would be called C28/35. 28 being the cylinder crushing strength and 35 the cube. The aggregate and constituent materials that make up the concrete will be different though.
| Is This Answer Correct ? | 0 Yes | 0 No |
Answer / ujjval solanki
20 means 20 mPa and 30 not clear but may be temperature at
which concrete should carried out
| Is This Answer Correct ? | 8 Yes | 99 No |
Answer / amit singh
c35 means grade of concrete and 20 means strength
| Is This Answer Correct ? | 4 Yes | 106 No |
Cement consumption of one cubic meter of aerocon blocks masonry?
0 Answers Sathiapal Engineers,
What are the uses of layer?
Ratio of cement : sand for fixing slab and tiles in the floor and also quantity of cement and sand requires for laying slab and tiles separately (area 100 sq. ft)
what is the crushing strength of good building stone
What are the structural steel & where they are used
what is the proper procedure in conducting a california bearing ratio penetration test on soil on cbr machine?
Please provide detail I.S standard code for using crush sand instead of river sand for plaster and concrete grade M15, M20, M25 and M30 and its mix design
1 Answers JPMorgan Chase, Sobha Developers, Structwel,
howto calculate the quantities of material used in fly ash brick after finding the volume??
What are the functions of grout inside tendon ducts?
32mm bar column lapping we use welding binding what is dimension of welding as per stander code?
What is critical path method (c.p.m)?
what is civil engineer greatest strength and weakness?
-
Civil Engineering (5086) - Mechanical Engineering (4456)
- Electrical Engineering (16639)
- Electronics Communications (3918)
- Chemical Engineering (1095)
- Aeronautical Engineering (239)
- Bio Engineering (96)
- Metallurgy (361)
- Industrial Engineering (259)
- Instrumentation (3014)
- Automobile Engineering (332)
- Mechatronics Engineering (97)
- Marine Engineering (124)
- Power Plant Engineering (172)
- Textile Engineering (575)
- Production Engineering (25)
- Satellite Systems Engineering (106)
- Engineering AllOther (1379)
