Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379) int i=~0; uint j=(uint)i; j++; printf(ā%dā,j); what is the use of "uint" int the above code
2377Sir we are using 250 kva DG its Diesel consumption 25 lits / hrs maximum load 160 kva now how to calculate units/ litres
1 281650m3 concrete volume how much cement sand aggregate details radio m20grade
L&T, Mars Planning Engineering Services, Relcon Infraprojects,
5 12020how to know the direction of a flow in a pipe line in a room without using pressure gauge?
ATS,
1 3530
Define bibo stability.
the volume of cement req for 70cum of brickwork in 1:6 cement mortar is approx is equal to 3cum 5cum 7cum 1ocum
What is the function of solenoid valve in on/off & shutdown valve and why it is not used in control valve normally?
What will happen if head of a selected pump is not utilized in a closed loop water circuit? Flow will increase or decrease or remain same?
What is the basis for classifying a material as a conductor, semiconductor, or a dielectric?
What is shielding effect?
When using mercury to recover very, fine gold from ore, what is the best way to separate the gold laden mercury from the ore?
How can we measure earthing resistance test (Earth meggar) of Transformer neutral pit while in live condition?.
how to calibrate load cell
In the Variable Voltage Variable Frequency Drive, how the Voltage and Frequency varied ? Is it varied in the Inverter part of the Drive ? Please give us supporting document if any.
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
wht is difference b/ osi & tcp/ip model
What is the tensile strength of wood?
Explain what is the best way to configure a bypass line in slurry services?
In India the supply voltage is 230 volt A.C. During the negative half cycle phase becomes neutral and neutral become phase? or what will happen during negative half cycle? how the electrons flow during positive and negative half cycle?