Answer / n c pathan

It depends upon the height of the building. If the
structure is G + 3 the steel consumption is about 2.5 kg
per sq.ft. If the structure is tower of 15 storeys the
steel consumption can be as high as 6 kg per sq.ft. For
towers which are 25 storeys high steel consumption is 7.5
kg per sq.ft.

Answer / sk.mahaboob basha

It varies based in structure
for G+1 floor - 1.6kg
for G+5 floors - 2.25kg
for G+12 floors - 3.5kg

Answer / abid khan

normaly G+2/3 wecan use only 1.5 to 2.5 kg per sqft and for
heigh rise building is 5.0 kg per sqft

Answer / kamlesh

The steel is required as per the type of structure, that means the tentative calculation of steel is as per below,

For Foundation & Slab = 80Kg/Cu.M.
For Column = 100 Kg/Cu.M.
For Beam = 120 Kg/Cu.M.
The Cu.M. quantity is RCC quantity of structure.

Answer / nitin

As a Thumb rule : Residential :-1)for G+7 structure - 3.00 to 3.50Kg/sft
2) For tower more than 7flrs. to 20 flrs. - 5.00 to 6.00 Kg/Sft
3) For tower more than 20flrs. to 50 flrs - 7.00 to 8.00 Kg/sft
Commercial - Ranging from 6.00 to 8.00 Kg/sft

Answer / rooban

Residential building - 4.5 to 4.8 kg/sft
Commercial building - 5.0 - 5.3 kg/sft

Answer / prashant kadam

A)Residential building
Upto 5 th floor. :-. 2.75 Kg/sft
Upto 12th floor. :-. 3.50 Kg/sft
Upto 20th floor. :-. 4.75 to 5.0 Kg/sft
B) commercial Building :- 4.8 to 5.25 Kg/sft

Answer / md.nazimul islam bhuiyan

It varies from 1Kg to 1.5kg per sft.

Answer / ehaque9499

2.5 to 3.0 kg per sft

Answer / kadir

for framed structure upto 3 story depends on span steel qty may vary

how much time will take for G+22 building for completion? activity wise like excavation,sub structure,superstructure,finishing,handover?

2 Answers   Raheja,

How many No of 4" Bricks Get consumed in 9" thick BB Masonary Wall of 1 cu.m.?

2 Answers  

why we create short columns under grade slab?

0 Answers  

std ht of wallmixer from ffl

2 Answers   Maples,

What is Well Point System in Dewatering

3 Answers  

With reference to construction of state highways, please let me know the total Bill Of Quantities as per the following details:- 1) Subgrade - 500 mm 2) Granular Sub-Base (GSB) - 200 mm 3) Wet Mix Macadam I (WMM I) - 150 mm 4) Wet Mix Macadam II (WMM II) - 100 mm 5) Dense Bituminous Macadam (DBM) - 60 mm 6) Bituminous Crust (BC) - 40 mm Road Length is 44 Kms. Road Width is 7 mtrs. Please provide the BOQ of each layer as per Compacted Factor & Loose Factor both. Also, if possible please provide me the approximate details of total material required (all categories viz. soil, gravel, stone aggregrate, sand, bitumen etc.) as per general mix design prevailing in India. Thanks & Regards -- Rokr

0 Answers   Power Plant,

WHY SHOULD WE HIREYOU OVER THE OTHERS WAITING TO THE INTERVIEW?

3 Answers  

koi bta sakta ha ka steel ko calculate krna ka full mathod pls

4 Answers  

VAT and CST ? Which benefits for buyer ? Why benefits?

0 Answers   L&T,

I want to know the material required per square foot in rcc roof. i.e. steel: kg/foot, cement/foot etc.

0 Answers   TVO,

practically where this hinge and roller condition used

2 Answers  

i have open space in my house, i want to make pcc there, si want to know how i calculate material , my area measurement is 10' x 10' x .25', pls tell me how much need cement, sand, concrete,if possible u than pls tell me the formula

1 Answers