Answer / pramod_wank

Formation of the cable as follows
A = Aluminium conductor
Y = PVC Insulation
W = steel wire round armour
F = Steel strip armour
WW = Steel double round wire armour
FF = Steel double strip wire armour
Y = PVC Outer sheath

as per your cable type is

--kv grade stranded aluminum sector shaped conductor,PVC
insulated, PVC inner sheathed, Steel strip armoured and
overall PVC outer sheathed,

Answer / mkk

so we read as AYFY AS
A ALUMINUM CONDUCTOR
Y PVC SHEATH
F FLAT STEEL STRIP ARMOUR
Y PVC OUTER SHEATH

IF _Y_Y
COPPER CONDUCTOR
NO ARMOUR AND OUTER PVC SHEATH

can we correct the p.f.of ac generator?

2 Answers   APGenco,

---

1.dg on load alarm/stop alarm... 2.dg on load. piu alarm alarm kaise chek krte hai

0 Answers   GTL,

---

Our Alternator nameplate specifies a power factor of 0.8. When the Alternator is on light load, the bus bar voltage rises to 11240 volts, whereas the standard value is 10500 volts. Is it ok to increase the power factor to 0.85 or 0.9. I am afraid because the power factor on the name plate is only 0.8 ?

3 Answers   Escube,

---

What is the formula that shows relationship between voltage and speed in an induction motor

2 Answers  

---

what is vector surge & vector shift? we have 25.3 MW(11kv) generator & 11kv/132kv transformer, connected with with 132 kv grid.vector surge relay is tripping frequentaly.what is permissible maximum limit for this.

3 Answers  

---

---

How to calculate busbar size & what is the procedure we make for determine that?

35 Answers   Auko Tex, Integra, PowerTech, Shadhin Group,

---

what is Real power and Reactive power ? what is difference between them ?

5 Answers  

---

how to test and calculat the head and discharge in borewell compressor

0 Answers  

---

What are the criteria shall be considers for sizing Fuse and MCB? If the rated current is 10Amps what should be the fuse size / MCB Size?

0 Answers  

---

why the manufacturer provide M and C terminals ? why they will not internally short them ?

1 Answers  

---

if 1hp jet motar drop voltage when start from 220v to 120v give the reason and solution.

1 Answers  

---

if we install two earth pits with a clear space of 5m without any interconnection,by checking the digital multimeter will it show continuity between earth pits? If so what would be the approx. value

0 Answers  

---