Answer / parveen

it is water leak detection system.basically it is used in
data center/ server room. it is many types1. wire based and
snesor based. whenever water touch to the cable then alarm
will generate.

Answer / thowsif_emerson_csm team

Water Leak Detection and Sensing Cable Protect your entire
facility, including production, services, and data storage
areas, against water related problems with SeaHawk Water
Leak Detection systems and sensing cable.

Water Leak Detection systems include alarm monitoring and
annunciation equipment. Whether it’s a single spot detector
(water sensor) in a utility closet or a robust system
incorporating spot detectors, distant read panels, and
RLE’s patented Water Leak Detection Cable (sensing cable)
you will be notified about potential water risks before
they become catastrophic.

Answer / sabir contractor

it is water leak detection system.basically it is used in
data center/ server room. it is many types1. wire based and
snesor based. whenever water touch to the cable then alarm
will generate.

why ac can not be stored?

5 Answers  

---

what is size of 3phase 4wire cable to be used for 11 ton ductable A.C and how to calculate cable size for different load

0 Answers   Tata Power,

---

Sir we are using 250 kva DG its Diesel consumption 25 lits / hrs maximum load 160 kva now how to calculate units/ litres

1 Answers  

---

why should be the frequency is 50 hz only why not others like 45, 95 56 or anything , why should we maintain the frequency constant if so why it is only 50

3 Answers  

---

In a running D.G set engine and Alternator is revolving at 1500RPM but no output in the terminal>>>>what to do?? someone told excitation problem ....please advice

3 Answers  

---

What is Automatic Voltage regulator(AVR)?

6 Answers   Cummins,

---

what is meant by bus bar and outgoing/incoming breaker in an electrical/electronic circuit

3 Answers  

---

now-a-days which devices are using for converter

7 Answers  

---

ii) A shunt motor supplied at 230V, runs at 900 rpm when the current is 30A. The resistance of the armature is 0.4 ohms. Calculate the resistance required in series with the armature to reduce the speed to 600 rpm, assuming that the armature current is then 20A. [12]

0 Answers  

---

Why does the rotor rotate?

1 Answers   Machino Polymers, OPTCL,

---

1 kva how much amps? How to calculate ?

2 Answers   L&T,

---

How many types of DC current

2 Answers  

---