Answer / jayesh pillai

star point connected to ground is known as neutral earthing
it is essential for preventing arcing ground effect during
faulty conditions and maintaining zero potential at neutral
even during unbalanced condition

equipment earthing is related to earthing of non current
carrying metallic parts that may be electrocuted during
earth fault. so it is doned in order to prevent any shock
to any person and even equipment when current flows through
such equipment body during fault

Answer / ramesh kumar

Neutral earthing is return path for current by making earth
as conductor.ie like all Star connedted system are having
return as earth and 3 phases metal conductor.

body earthing is least path for fault curretnt or leagage
current flow by connecting metal body to earth point by cu
conductor.

Answer / dhananjay kumar ....gpl..

The star point of an electrical machine is earth to
make the neutral point and ground potential is called neutral earthing. 
  

Answer / prabhat

neutral earthing is the process of connecting the star point of a 3 phase system to earth whereas equipment earthing is the process of connecting non current carrying part usually the metal frame of an equipment to earth.

Answer / dhananjay kumar from japla (gp

The star point of an electrical machine is earth to make the neutral point and ground 
potential is called neutral earthing. 
This is done so that a number of measurement and protective system
can be suitably connected with the power system.
       The equipment earthing is done to protect operating personal to protect them for electrical shok. 

In some cases equipment earthing also protect the environment from earthing. .......

Answer / m. p.renu.

There is an advantage of body earthing and neutral earthing
interconnected, since any single phase connected load if
interchanged, the fuse or the circuit trips indicating the
phase wire is wrongly connected.In any case the earthing
system works when there is a normalleakage and as we have
interconnected the two earthing system the total earth
resistance becomes low & this is an added advantage.

If not so kindly explain.

Answer / venkat

earhings are 2 types .they are 1)neutral earthing 2)
equipment earthing . neutal earthing is connecting non
metallic part to ground. system earthing is connecting
some part of the system to ground.

what irequirment need to be followed when working on live equipment

0 Answers  

some time we open engine breaker 8.0 MW load but plant not trip. and another time engine open 4.0 MW load engine trip why? individually engine breaker open & individually emergency stop why difference?

0 Answers  

what is basically a pulse transformer?

1 Answers  

Why DG self motor winding burnt out?

1 Answers   Aegis,

Which capacitor is used in ceiling fans ?

1 Answers  

What is the calculation for 1000Amps Air circuit breaker relay settings.

1 Answers  

why cu losses called cu losses.

6 Answers  

how to compare with Relay settings for HT&LT panels, RMU panel, and PSS CSS transformer?? 1) Load amps, 2)Tripping time, 3) CT ratio, 4)Cable size 5) Transformer KVA rating 6) transformer full load amps

0 Answers  

what is a bus riser in power system and why it is used

2 Answers  

why we use capacitor in lighting fixer

2 Answers  

Damping resistor provided in open delta (tartiary) winding of a measuring PT at the incoming of a MV inverter drive panel is getting heated up. Can any body explain the reasons and suggest the remedy?

0 Answers   Danieli,

How can we design MEP services for Commercial Building in area about 22 Acres of land?

1 Answers