Answer / e venkat reddy

CIRCUIT BREAKER WORKS ON ON LOAD WHERE AS ISOLATOR WORKS ON
OFF LOAD CONDITIONS. ISOLATOR WILL OPERATE AFTER THE
CIRCUIT BREAKER ACTION TAKING PLACE.

Answer / r.kalyana sundaram

IN CIRCUIT BREAKER THERE WILL BE TRIPPING MACHANISM.IN
ISOLATOR THERE WILL BE NO TRIPPING MECHANISM.ONLY ON,OFF
SWITCH FUCTION.

Answer / syed qamar abbas

Circuit Breaker is a automatic device while isolator
operates manually

Answer / mick

A circuit breaker is designed to automtically open the live
line if the current exceeds its rating - i.e. a 5A circuit
breaker will open and disconnect the live line should the
current exceed 5A. It primary purpose is to automtically
disconnect the live under a fault.

A isolator is usaully a hand operated device that will
disconnect the live and the neutral. Manly used to allow
work to be carried out on equipment (a motor for example).
Normally an isolator will have some way of being 'locked
off' so that the equipment cannot be energised. It does not
have an automatic function.

Answer / rajesh ku sahu

# 2 CIRCUIT BREAKER WORKS ON ON LOAD WHERE AS ISOLATOR
WORKS ON
OFF LOAD CONDITIONS. ISOLATOR WILL OPERATE AFTER THE
CIRCUIT BREAKER ACTION TAKING PLACE.

Answer / kk_london

a circuit breaker will have closing and tripping mechanism
and it can be closed or tripped in remote and where as
isolator will have only fuses and needs to be operated
locally

Answer / naresh kumar dhal

we can operate the isolator only manually.
But we can operate the cb Automatically with the help of a
relay and manually also

Answer / suthan prabhu

Isolator is an off line usable device.That means we are
using it for maintenance purpose.But Circuit breaker is a
switching device to use in On line .

Answer / nikesh

Circuit breaker is switch which operate manually during no load condition and operate automatically during fault condition or Isolater is operate off load condition after operate circuit breaker.

Answer / chiranjit mondal

circuit breaker operates on load condition i.e it can break
inductive or capacitive current but isolator operates at no
current condition i.e itoperates when no current is flowing
through it.

What is transmittance?

0 Answers  

What is meant by load angle of an alternator? Upon what factors does the load angle depend?

0 Answers   VECL,

Load break swicth maintenance procedure.

0 Answers   KSEB, L&T, Siemens,

Readings of ER300P Trivector meter

0 Answers  

why r use the wave taper in the substation ?

2 Answers   L&T,

application s to shunt coil

0 Answers  

What is the full form of GSL wire

8 Answers   Bhel, GSL,

I know during Surge Impedance Loading maximum power is transferred through a transmission line and also Sending end voltage becomes equal to Receiving end voltage i.e Vs=Vr so my question is if both end voltages are equal then how current travels in such line hence how power is transmitted because flow of current needs Potential difference??

3 Answers   NTPC,

how to check 3phase motor winding with help of multimeter?

2 Answers  

In a 11Kv/433Volt Delt-star step down transformer one one line(Line-B) of HT site is open & earthed on DP structur. What will be the voltage on LT side R-Y, Y-B,B-R and R-N, Y- N & B-N?. Please help to understand the problem with examples. Arvind , Jaipur.

1 Answers  

What is A check, B check, C Check & D check for a diesel Generat

0 Answers   Jtekt Koyo Bearings,

why weight is put on pulley?

1 Answers