Interested to Buy Any Domain ? << Click Here >> for more details...
what is difference b/w HT & LT and the range of HT & LT ?
- 22 Answers
- 65604 Views
- AF, Schneider, I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / waheed imran virk
what is difference between analog and digital signals ?
| Is This Answer Correct ? | 3 Yes | 6 No |
Answer / waheed imran virk
LT IS BELOW 1000 VOLTS AS LIKE 220 TO 600 VOLTS
HT IS ABOVE 1000 VOLTS AS LIKE 11 KV
| Is This Answer Correct ? | 1 Yes | 5 No |
Answer / hardik patel
nothing more diff but, as per voltage level we divide the
voltage level in diff-diff part.
LV-LOW VOLTAGE-UP TO 750V
MV-MIDIUM VOLTAGE-750-3.3KV
HV-HIGH VOLTAGE-3.3 TO 33KV
EHV-EXTRA HIGH VOLTAGE-MORE THEN 33 KV
| Is This Answer Correct ? | 0 Yes | 4 No |
Answer / arjun
HT- above 1.5 Volts
LT- below 1 Volts
A alarm watch cell is an LT cell.
A bigger alarm watch cell is an HT cell.
| Is This Answer Correct ? | 6 Yes | 11 No |
Answer / md. obaydur rahman
Having a high voltage, or designed to work at or sustain
high voltages. High-tension(HT) wires used to carry
electrical power over long distances sustain voltages over
200,000 volts and if the voltages are lower then called low
tension(LT).
| Is This Answer Correct ? | 1 Yes | 6 No |
Answer / sujeet kumar
LT-upto 1Kv
HT-Upto!11Kv
ST-11-33Kv
EHT-33-66Kv
ES-Beyond 132Kv
| Is This Answer Correct ? | 15 Yes | 25 No |
Answer / vignesh
HT-High tension(Above & include 3.3kV)
LT-Low tension(below 3.3kV)
| Is This Answer Correct ? | 16 Yes | 27 No |
How to find synchronous motor speed formula Ns=120f/P ?....
what will happen, if both relay contact has live supply, and coil of relay activated
ALL HT /LT PANEL TEST? DISCRIPTION.
Before i went to bed my master bathroom lights were working fine. At 2 am, when I went to use the lights, none of them were working. The outlets throughout the bathroom work, but the lights and fan above the toilet don't. I have two panels of switches. The one panel has four switches. One of the switches turns on the hall light, and that works. The other three are to other lights, and they don't. The other panel has three switches. One of those is to the fan, and the other is to a light above the toilet. The other is a to light that is also on that other panel. I tried the breakers, and the one that turns off the outlets, marked for the bathrooom, turns on and off the outlets. None seemed to be tripped. I checked the lightbulbs, and they are fine. Please help
What is differential relay? How it operates?
Can we Co-ordinate relay in Load Break switch?
Define corner frequency?
what is different between buchhoz relay and pressure relife devices in transformer
what mean by machin
I've descovered that when the earth wire in a domestic electrical installation is not connected back to the board (ground) a voltage of between 9-24v is is found to be present in the earth wire. When connected at the board there is no voltage - is this normal and why does it happen?
DEAR ALL I have motors ( 10 units )each one is 90kw 380V 50 HZ 1000rpm but new local pwer is 220v 60 hz requierd rpm should be 1000 pleas what the beast solution is used frequncy converter or rewinding all motos or chang all motors thanks
difference b/w semiconductor and dielectric
-
Civil Engineering (5086) - Mechanical Engineering (4456)
- Electrical Engineering (16639)
- Electronics Communications (3918)
- Chemical Engineering (1095)
- Aeronautical Engineering (239)
- Bio Engineering (96)
- Metallurgy (361)
- Industrial Engineering (259)
- Instrumentation (3014)
- Automobile Engineering (332)
- Mechatronics Engineering (97)
- Marine Engineering (124)
- Power Plant Engineering (172)
- Textile Engineering (575)
- Production Engineering (25)
- Satellite Systems Engineering (106)
- Engineering AllOther (1379)
