hi friends,can u send me the link for downloading Allen_bradley_RsLogix_500

hi friends,can u send me the link for downloading
Allen_bradley_RsLogix_500_Pro_V_7.0 software with
activation file.or how can i find activation file for this.

Question Posted / jagdish_ice

2 Answers
5199 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

hi friends,can u send me the link for downloading Allen_bradley_RsLogix_500_Pro_V_7.0 software wit..

Answer / chetan

If you are having the original CD of the software, then you
can log on the site of AB.Get the activation file for RS
Logix 500 Pro software directly from site itself.
If the CD is pirated, then you will be unable to work on RS
Logix 500 Pro software.

Is This Answer Correct ?

2 Yes

0 No

hi friends,can u send me the link for downloading Allen_bradley_RsLogix_500_Pro_V_7.0 software wit..

Answer / ash

u can find in isohunt.com
but not sure whether its work or not.its expensive software
& normally used by only industrial people.we were lucky
enough to work & it in the company where we did our intern.i
think now latest is 5000series on which we worked...

Is This Answer Correct ?

0 Yes

0 No

Post New Answer

More Instrumentation Interview Questions

How r the calculation of process line mpm.

0 Answers Bhushan Power Steel,

i have D.p. transmitter of range 0 to 2540 mmWC, i want to use this for flow measurement (0 to 500 ltr/hr.) what should i do?

9 Answers

When a field input to plc is coming from 400 to 600 meters and the input is in 24 V DC? So signal cable of which cross section i should select for proper signal to plc?

5 Answers Exxon Mobil,

If an Instrument has 550 ohm internal resistance and the cable used for that instrument is 0.5 ohm per meter resistance. If the voltage is 12volt.How much length cable can be used?

2 Answers

can you give some devices that measure directly the mass flow rate.

1 Answers Takreer,

Can anybody tell me the exact explanation for Functional calibration?When it should be done on process or on lab? Advanced Thanks

2 Answers

key exchanges in wpa,wpa2,tls

0 Answers

How we will check whether the proximity, which we have is either NPN or PNP, if no data sheet or manual or any details is available to us ???

1 Answers

Draw a complete P&ID of a flow suction tank indicating all control & protection equipment. Indicate all its inlets and outlets. Explain the controls for this system

0 Answers

An engineering term STALL used in compressor operation what it means?

1 Answers

What should be the main consideration while starting the Rotating compressor when we dont know the cut in and the cut off pressure setting of the pressure switch

0 Answers

how pressurize drum calibrated ?

0 Answers

For more Instrumentation Interview Questions Click Here