Answer / vikrant verma

1,86000 km/second

Answer / veer pal

The speed of current is 186000 miles/sec. aprox.

Answer / anantha murthy manja

You just consider some water is flowing in a drain,
You consider the drain is a conductor and the water is Current.
There will be a pond at the end of the drain. The flowing
water is going to fill the pond in an hour.The speed it
takes to fill the pond is Voltage. The product of the water
and its speed is called Power(Unit is Watts). If the pond is
filled by an hour it is called 1 Unit (KWH). That means if
the water flowing 5 foot level in the drain, it will be 5
Amps. If it is flowing 200 km/hour, consider 200 Volts to
reach the pond.
Power = V x I That is Power = Current X Voltage. P = 200 X 5
= 1000 Watts If it is flowing for an hour it will be 1 Unit
(KWH)

Answer / tushar kamble

speed of electron is only 15 m /sec but the speed of the
current is more than speed of light .

Answer / amit mohan bhatt

speed of current is equal to the speed of the flow electron
bt it is also proportinal to strength of the potential
diffrnce exists between the two points and if the the speed
of electron become equal to the speed of light than the
whole electron will change into energy..........

Answer / suresh kamboj

Speed of electricity=300000km/sec.

Answer / sujeet kumar singh

the speed of current equivalent of light speed.

Answer / hasan mehdi

Speed Of current is 50cycle/Sec.
Mean 50hz.

Answer / micro power system

rate of flow of electrons is current. and electron flow is
due to potential difference(PD). Hence the speed of
electrons depends on potential difference hence, speed of
current also depends on potential difference.

Answer / rama krishna

i just leaned that the average speed of an electron in a
coper wire is around 0.05mm/s

how come we can talk on the phone with a delay of milisecs?

The transformer which is smallest in size is and how to calculate that? The options are 100 KVA, 50 Hz 100 KVa, 100 Hz 100 KVA, 25 Hz 50KVA, 25 HZ

4 Answers   Ranbaxy, Zee Laboratories,

what is the formulae for selcting capacitor bank to increas pf

3 Answers  

We use ACB in LT and VCB in HT.But if we use VCB in LT and ACB in HT that what will be the effect on the system or any power range?

6 Answers   Honda,

what is neutral grounding resistor?

3 Answers  

why we have and use 3 phase not 2 or 4 or other in power system?

0 Answers  

Discribe type of fault in DOL and stardelta startor.

0 Answers  

what is the resistence of human body?

3 Answers   BBC, NTPC,

diagram for soft stater ?

3 Answers  

what should be the spaciing between street lights designed for a manufacturing location. any IS codes?

0 Answers  

1. If 8.35%Z means the percentage impedance of 132kV-line from power company, we will like to confirm its base capacity?

0 Answers  

solor panels arrange some angle,panel is flat fitted energy was produced or not why?

0 Answers  

What are the advantages of skewing of cage rotor conductors?

0 Answers