what is lifespan of an RCC structure?
Why the RCC structures failing in quater of its life span?
Answers were Sorted based on User's Feedback
Answer / amol
The lifespan of RCC is taken as 100 years.The RCC structure
failing in quater of its life span because of poor
cosruction means no proper mix of concrete used,bad
workmanship etc.
Is This Answer Correct ? | 145 Yes | 16 No |
Answer / sanjay kantrao kulkarni
100 years, due to poor workmanship, poor quality control.
Is This Answer Correct ? | 80 Yes | 22 No |
Answer / sjtbehera
we design the RCC structure for 100 years. failure of RCC
structre may have various reason, i.e over reinforced or
under reinforced, poor quality of work, falt design.
ok
Is This Answer Correct ? | 45 Yes | 5 No |
Answer / kps subhash
usual life span is 100 yrs. if a structure is properly
designed for flexure , shear torsion etc if workmanship
is good,steel properly bonded with no atmospheric contact
then the building will last for its life span
Is This Answer Correct ? | 33 Yes | 9 No |
Answer / nissi engieers, guntur
RCC technology is a gods gift on the earth its life span is
about to 100 years we cant say because invention of RCC
design is less than 100 years so that we are not conclude
the 100 years. some of the structures such as dams old
buildings life ia about 50 to 60 years they are very good
in condition.
Now why the rcc structures are fails due to lack of proper
designing imperior quality of material,not maintaining
quality control measures and last and final is lack of
proper curing in the structures.
Is This Answer Correct ? | 27 Yes | 3 No |
Answer / kosh nath adhikari
As mentioned above, the life span of RCC structure is
assumed as 100 years if construction quality is assured as
per structural design and construction also properly
followed standard specification.
Is This Answer Correct ? | 15 Yes | 6 No |
Answer / vishnu lal jat
RCC Structure is very long life span(assume of 100 years)
but some Reason for RCC Structure failed. 1st reason not
good material(Cement,Sand,Aggreats).2nd reason not good
qualitly & workbility.3rd reason not proper way mixes
disgine & curing.4th Reason not proper way steel provide
according to load
Is This Answer Correct ? | 12 Yes | 4 No |
Answer / arun verma
When the RCC was developed in the early mid twentieth
century, the quality of each input was taken into account
based of the cost of inputs and the quality of our
integrity at that time.
With passage of time the quality of inputs have gone down,
One because of poor integrity of each of us contributing
into it be it the material manufacturer or the worker at
the workmanship stage.
and
Two because the cost of each thing be it labour or
material, has gone up substantially, compelling the
manufacturers and material suppliers to supply material at
competent rates, thereby prompting them to compromise in
quality.
Also while the factor of safety taken into account at time
was 3 X 3 times with plain mild steel, now with torsteel it
has been brought down presuming that the structures are
never stressed to that extent.
I believe, if we we are able to correct our mentality and
if the buyer agrees to pay the hike in the cost towards
improving the material quality and the workmanship, the
life will be atleast 80% of the stipulated life of 100
years.
Is This Answer Correct ? | 8 Yes | 3 No |
Answer / khanna
One of the most important test conducted on cement is soundness test. This test certifies how the concrete prepared with that cement will behave in the next 80 years, when subjected to weathering, I.e., hot days cool nights, summers and winters etc.
Two methods of testing is prescribed by BIS. First one Le-chatlier method is old, crude but cheap and is available in all the labs, and second one autoclave method is modern and costly, therefore not available in all the labs.
My experience says 99% cement samples passed in le chatliers expansion shows poor results in autoclave expansion.
To generalise RCC age as 80 years is wrong, as even the building is ideally constructed, following all building code, but the cement is not tested as per autoclave expansion than the life of RCC may be reduced considerably.
Looking at the present constructions the safe life of RCC may be taken as 80 years, if constructed as per NBC of BIS.
Even the IS-456 is modified again in 2000.
A small house is constructed on word of mouth assurance of material vendors that material is in order, of labour contractor that every material is properly mixed and placed in position, of architect and structural engineers that sufficient factor of safety has been considered, but who will be alive after half life of building, to see different type of failures of RCC.
Is This Answer Correct ? | 6 Yes | 1 No |
Answer / harish rajwar
RCC Structure is very long life span(assume of 100 years)
but some Reason for RCC Structure failed. most reason Indian are less quality con sis
Is This Answer Correct ? | 6 Yes | 3 No |
what is the ratio of m50 grade in concrete block
water cement ratio
How to convert 0.44 N/MM2 in to Kgf/cm2
2 Answers Ukay Metal Industries,
How many kilograms of sand required in cufic feet for one cubic meter of M25 grade concrete
indiploma civil engineering student r studied is456-1978. but in practicial we r using 2000 version i think 1978 version didn't use the student. any openion?
why spacer in reinforcement?
manhole height is 1500 mm and width of brickwork is 230 mm dia of manhole covering is 560 mm brick masonry 1:4 horizontal length is 1500 mm and plaster 12 mm thick on both side 1:3. how to estimate the quantity of brickwork with mortar cement and sand for manhole chamber.
iam constructing a new hall of size 21'*14'. we r constructing without columns...i.e only with basement..and constrcting wall thickness of 9" only...can I laid slab on these walls? is it safe?
Whr is use tierod???what is standard size of it
what is the meaning of M & 20
How many number of cement bags per running metre are required to cast pileof M-20 grade
can we use .5 water-cement ratio for any type of cement?