Answer / jigar parikh

maximum demand is (connected load * demand fector)= maximum
demand . in define we can say that maximum load is the
maximum power, integrated over a specified time interval,
such as 15 or 30 minutes, and usually expressed in
kilowatts.

Answer / ra

MAXIMUM DEMAND IS THE MAXIMUM VALUE OF READING THAT IS
RECORDED DURING A FIXED PERIOD OF TIME ( SAY 30 MINUTES.).

Answer / toufique rahman

The greatest demand of load on the power station during a
given period. The highest peak on the power station load curve.

Answer / ee youth

Maximum Demand = Total Connected Load x Demand Factor

Answer / joel q.

Maximum Demand = Total Connected Load * Demand Factor.

Maximum demand is needed in determining the total capacity
of the transformer and in sizing up the switchgears needed
in the substation.

Answer / zulkifli abd. rahman

maximum demand is calculated and bill by a kW demand meter,
which record the highiest kW value consumed in one 30
minutes period, over a monthly billing cycle.

Answer / k.rao

Maximum demand defined by the maximum load connected by the consumer is called maximum demand.
or
maximum demand=(load*demand factor)

Answer / sridhar.h

Which is calculating from present demand's maximum value,
That means peak value.Present demand(VA) =
Current+Voltage+Power factor, if it is in more then 1000
mean = KVA. How much consumer used maximum enrgy(Present
demand)form the cycle periode that value maximum demand.

Answer / parasuram

Maximum demand:
CL*Demand foctor=demand load
Max demand load = sum of demand load*diversity factor
Example:
Unit1 CL-5kW De.f=.8, Dload=4kW
Unit 2 CL-7kW =.8 =5.6
lift 7.5 =.8 =6
total =15.6kW
apply div 65%(residence)
max demand load=10.14kW

Answer / mary

The greatest average value of the power, apparent power(KVA), or current consumed by a customer of an electric power system, the averages being taken over successive time periods, usually 15 or 30 minutes in length.

1. transformer design formula ? 2. how to calculate the primary turns and secondry turns ? 3. core types ? 4. how to find the primary current and secondry current ? 5. how to calculate the stacking factor ? 6. range of fulx density ?

2 Answers   Automation, Indian Railways, Mogora Cosmic,

HOW TO CALCULATE THE WIRE SIZE FOR THE GIVEN LOAD?

5 Answers  

PIU how does work?

0 Answers  

Why we use Y-Y connection in power transformer (8-10 MVA, 132 kV to 11 KV)and D-y in distribution transformer (2 MVA, 11 KV to 440 Volts)?

4 Answers  

no EB power DG is not starting?

6 Answers  

What is the difference Marshaling box and RTCC (Relay tap changer circuit) Panel of transformer ?

1 Answers  

where we use 1 phase & 3 phase supply ?what is major advantage using 3 phase over than single phase ?

3 Answers  

if a 2 ohm resistor,2 ohm capacitor and a 2 ohm inductor is connected parallely to 12v source.Then what is the value of current in each branch.Is current flows in each branch at the same time?If not so then provide the proper sequence

1 Answers   Tata Steel Limited,

If the secondary winding will be open in current transformer, how to damage the insulators

2 Answers   TPDDL,

How to back charge the Gas turbine generator

0 Answers  

what is ripple ??? what is harmonics ?

3 Answers   ABB,

Which thing is maximum in RLC circuit at resonance a)power consumption b)inductive current c)capacitive voltage

0 Answers