What is the meaning of maximum demand
Answers were Sorted based on User's Feedback
Answer / manoj
the voltage ¤t is crossing the limit it is called
maximum demand system
| Is This Answer Correct ? | 0 Yes | 3 No |
Answer / ratheesh.kr
maximum demand= connected load*diversity factor
| Is This Answer Correct ? | 3 Yes | 7 No |
Answer / gurudutt sharma
Maximum Demand is a Total load end output after losses such
as powerfactor
| Is This Answer Correct ? | 0 Yes | 9 No |
Answer / selvan
Max demand is total load used by the consumer.
| Is This Answer Correct ? | 22 Yes | 41 No |
Answer / motilal sahu
IT IS THE PEACK POINT IN LOAD CURV.
LOAD CURVE IS DRAWN B/W CONNECTED LOAD AND TIME
| Is This Answer Correct ? | 8 Yes | 28 No |
Answer / v. raja arcot
maximum demand is total load /power factor = maximum demand
in KVA.
| Is This Answer Correct ? | 10 Yes | 30 No |
Answer / mansoor ahmed
Max. demand is the total load carrinng by consumer for
duration of 30sec.
| Is This Answer Correct ? | 6 Yes | 37 No |
Answer / aru
Maximum Demand is the total load attached to the system
| Is This Answer Correct ? | 7 Yes | 38 No |
Answer / manjunath kunigal
Maximum Demand is a Total load end output after losses such
as powerfactor etc.
| Is This Answer Correct ? | 19 Yes | 51 No |
Answer / atul dwivedi
MAX DEMAND IS TOTAL LOAD USED BY THE CONSUMER FOR MORE TAHN
30 SEC.
| Is This Answer Correct ? | 11 Yes | 47 No |
What is the safety of UPS?
Draw a SLD of DG distribution up to main LT panel?
Why does the phase voltage of two healthy phases become equal to the line voltage in case of an ungrounded neutral 3 phase star connected sytem when a single line to ground fault occurs ?
sourse is 66 KV / 350 MVA, transfarmer is 1000 KVA 6.6 / 0.415 kv, iF fault is 28.75 MVA on 0.415 KV Bus then calculat the Transfarmer Impidance
wat system call?
what is voltage
what is voltage,current,restance,. what is single phase&three phase motar. what is basic electrical 'farmoulas. what is defirens quetions of electrical maintenance.
what are the ''pitting rings''and how cn they be controlled in a series generator
Why grables are put in substation?
how to calculate busbar size? if ex:1000amps i need to calculate busbar size and what size of bar?if any example caculation pls give the formulas.
what is the importance of fault level in power system and how is it decided
why name plate detail HP/KW rating of a motor is different from measured value HP/KW using formula?
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)