what will be the cost of thickness of 125mmor rcc measurement of 52x33.75 feet



what will be the cost of thickness of 125mmor rcc measurement of 52x33.75 feet..

Answer / Farhqe Alam

The cost of a 125mm thick RCC (reinforced concrete) slab or the measurement of 52x33.75 feet depends on various factors, including labor costs, material costs, location, and local construction practices. Here is a general breakdown of the estimated costs:

- Concrete Material Costs: Assuming a typical concrete mixture costing $100 per cubic meter ($34.42 per cubic yard), a 52x33.75 feet slab with a thickness of 125mm (or 1.25m) would require approximately 69.3 cubic meters (243.8 cubic yards) of concrete. The material cost for this amount would be around $6,930 ($24,382).
- Labor Costs: The labor costs for pouring and finishing a concrete slab depend on the region and local labor rates. On average, the labor cost may add an additional 15% to the material cost, bringing the total cost to around $8,400 ($30,618).
- Formwork Costs: The formwork materials (such as wood or steel) required for shaping and supporting the concrete during the pouring process add another 5% to 10% to the total cost. Assuming a 7.5% increase in cost, the total estimated cost for the RCC slab would be around $8,962 ($32,452).

Is This Answer Correct ?    0 Yes 0 No

Post New Answer

More Civil Engineering Interview Questions

Requirement of cement, and steel 1:2:4 ratio concrete in 1128 Sqft area(Cement No of bags, steel in Kgs)

1 Answers  


Instrument used for determining PH of water

1 Answers  


what is stressing

2 Answers   Simplex,


whate the size of bricks are avalable at site

5 Answers  


why there is curve at the end in channel sectin

3 Answers   Birla, GNFC,


What is the difference between yeild strength and compressive strength of steel???

1 Answers   Simplex,


we are use us steel in PQC road

1 Answers   Student,


For 1 cu m of concrete required 1.54 Cu m times dry volume. Pl give clarification of 1.54 factor

1 Answers   RASA, Unity Infraprojects,


what is the procedure for flakiness and elongation index

1 Answers  


What is the difference between vitrified and ceramic tiles?

2 Answers  


how to calculate the cement, sand, coarse aggregate required for one cubic meter of concrete?

0 Answers  


What is the name of this multiplication factors ?

1 Answers   Engineers India Limited, L&T,


Categories
  • Civil Engineering Interview Questions Civil Engineering (5086)
  • Mechanical Engineering Interview Questions Mechanical Engineering (4453)
  • Electrical Engineering Interview Questions Electrical Engineering (16638)
  • Electronics Communications Interview Questions Electronics Communications (3918)
  • Chemical Engineering Interview Questions Chemical Engineering (1095)
  • Aeronautical Engineering Interview Questions Aeronautical Engineering (239)
  • Bio Engineering Interview Questions Bio Engineering (96)
  • Metallurgy Interview Questions Metallurgy (361)
  • Industrial Engineering Interview Questions Industrial Engineering (259)
  • Instrumentation Interview Questions Instrumentation (3014)
  • Automobile Engineering Interview Questions Automobile Engineering (332)
  • Mechatronics Engineering Interview Questions Mechatronics Engineering (97)
  • Marine Engineering Interview Questions Marine Engineering (124)
  • Power Plant Engineering Interview Questions Power Plant Engineering (172)
  • Textile Engineering Interview Questions Textile Engineering (575)
  • Production Engineering Interview Questions Production Engineering (25)
  • Satellite Systems Engineering Interview Questions Satellite Systems Engineering (106)
  • Engineering AllOther Interview Questions Engineering AllOther (1379)