Answer / Manoj Kumar Paswan

Estimating shuttering material requirements involves several factors depending on the specific project details. Here are some common thumb rules for estimating materials for slabs, beams, and shear walls:n
1. Slab:n
- Plywood: 3-4 sheets per 100 sq ft of floor arean
- MS Plates: 1-2 sheets per 100 sq ft of floor area, depending on the thickness required.n

2. Beam:n
- Plywood: 1-2 sheets per 50 linear feet of beam length, depending on the complexity of the formworkn
- MS Plates: 1-2 sheets per 50 linear feet of beam length, depending on the thickness required.n

3. Shear Wall:n
- Plywood: 1-2 sheets per 50 sq ft of wall area, depending on the complexity of the formworkn
- MS Plates: 1-2 sheets per 50 sq ft of wall area, depending on the thickness required.n

Concrete Mix designs for M15,M20,M25,M30 and M35

23 Answers   Arelgee Consultants, ATCO, Fusion, Gammon, Power Cable, Raushan Engineers, Simplex,

---

you are planning to paint a newly fabricated workshop building made of structural steel of 10 tons total mass.you are require to paint 1 cot of primer and 2 coats of top coat.How many liters of primer and top coat you will request

2 Answers  

---

Clay and silt content in a good brick earth must be at least

1 Answers  

---

How to find concrete quantity for a circular column ?

2 Answers  

---

How many no of cement bags required to do the concrete with the proportions 1:1.5:3 for 4inch thickness for 100 sqft?

3 Answers  

---

Can any colleague send me the steel frame pictures of roofs, beams, columns, footings, roof bends, door bends etc. I shall be very gratefull.Suhail_akhter@hotmail.com

0 Answers  

---

how to calculate bottom width of staircase explain briefly

1 Answers  

---

what is plate load test??

4 Answers  

---

factor which affects design of concrete mix

4 Answers  

---

What is the quantity of cement in mix m20 concrete?

1 Answers  

---

What are the causes of failure of foundations and remedial measures?

6 Answers  

---

How to calculate paint drums per meter square

1 Answers   Speco,

---