Where the excitation is given either stator or rotor in
actually in power plants?
Answers were Sorted based on User's Feedback
in alternators, we recieve power from
stator side. Now rotor contains
electromagnet to generate poles...so that
rotating magnating field generated by
rotor cuts stator winding.. Hence emf is
generated on stator winding..
Now elecromagnet needs supply to
become magnet.. So excitation is given to
rotor.
| Is This Answer Correct ? | 4 Yes | 0 No |
Answer / nagaraja
Why excitation is required?If the voltage not developed in
field,because of poor resuidual voltage in stator.thats why
externely giving some dc less voltage to stator field for
improveing resudial voltage. Resuidal voltage means ,some
few flex has alwayes present in stator poles,that is a
Resuidal voltage.
| Is This Answer Correct ? | 0 Yes | 2 No |
Answer / shekhar
excitation i.e field winding is generally on rotor and
stator is connected to main line.
But it is not a hard and fast rule it could be either on
stator or rotor i.e why name alternator dnt confuse with
alternating current
| Is This Answer Correct ? | 1 Yes | 5 No |
Answer / princealekota
Main supply is given to the stator terminals and excitation
is given to the rotor terminals of the induction machine
| Is This Answer Correct ? | 0 Yes | 4 No |
Answer / abu
excitation is given to stator because rotor is driven
with mechanical power using turbines
| Is This Answer Correct ? | 1 Yes | 16 No |
what maximum load will take a aluminum cable of 50mm 4 core.
how to calculate short circuit current for the busbar
why do we lay up the core of a cable?
What is Primary and Secondary Injection Test of CT and Relay.
how many earthing should give for transformer body and nuetral
tell 2 reasons for why only copper is used in domestic wires& only alluminium in transmission lines ?
what is the difference between 2 way and 4 pole selector switch???
what is bausbar?
how to calculate cable bending angle in a trench?
what is the problem when i want to close a circuit breaker by local position it closes well.but when i close it in remote position it trips
Is phase preventer require when overload relay is there
how can we measure rotor current of a 3phase wound rotor induction motor connected to liquid resistance starter
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)