Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379) I want to make street light with solar system ... What may I do for procedure and how much of estimation for each material ... If any one knows guide me and inform this id : aravindd7@gmail.com
1869A shopkeeper allows 10% discount on the price of an article and sells it for Rs 7,600. What is the marked price of the article?
1 2697I need to calculate the Battery bank back up for below configuration:- UPS - 120 KVA Battery Bank - 200Ah Volt of each cell - 12 V Total No of cell - 34 No's Can you please help me to get the battery back up time for above configuration...? along with formula
1 2727
What is cut off relay? And why use in PLC and DCS?
what is the cast iron grade of composition of c-3.06% , Mn- 0.48% , Si-2.38% , S-0.088% , P-0.092% , Cr-0.12% , Ni- 0.012% , Mo-0.00%
What is the BS(British Standard)code for 11kv motor
Which material is used to made up of electrodes of resistance welding?
Why should a chain drive be used over a belt or rope driven drive?
Anybody tell me about modbus hex address of l&t trivector meter er300p??I want to read voltage,current,kwh etc via rs485...If anybody have a manual then send on my mail..Brijeshmodi18@gmail.Com
Define railroad track ballast?
What is beating-up?
what is the meaning of 40/20 src
mention hazard experienced during installation
technically, what is the reason behind starting the motor star the delta connection .. and what other ways to do this rather than using " star-delta transformer"
Why do we use center tap transformer that used with portable tools
Do you know what is bolt?
on which basis safety valves are set with particular pressures?
how we do Vector group ,magnetic balance and tap changer test in Transformer?