Answer / hussain

Material Receiving Inspection and Delivery to Site for Installation as per AFC Drawing.

Monitoring Men Power and Cost control.
Coordination with Planing Engineer on Construction Work and receive Weekly and Monthly Plan from Management.
Coordination with Client, Contractor and Vendor on Technical Issues.
Having Good Communication with Team.(Important)

Answer / mashani

as engineer our responbilities on site is make sure that
the construction based on detail engineering....

1)we r having one problem .one dry type transformer(6.6KV/433V)is taking high magnetizing current on delta connected HV side of "U" phase when compared to other two phases.could any body tell the reason why it is happening? 2)why CT secondary side protection core has got higher winding resistance when compared to that of metering core of same CT?

2 Answers  

---

Fire pumps are not used with ELCB control, why ?

4 Answers  

---

In parallel operation time both NGR’s close or not close if both close what will happen

0 Answers  

---

what is the difference between neutral and earth????

4 Answers  

---

FACP Means

1 Answers   RR,

---

HOW TO CALCULATE THE CAPACITOR RANGE FOR LOAD FOR PF IMPROVEMENT? EXPLE:FOR 65 HP LOAD HOW TO CALCULATE CAPACITOR RANGE?

12 Answers   Al-Malik, All Star Electric, GEC, Reliance, Universal Industries,

---

What is the function of under voltage release ?

0 Answers  

---

In power plant synchronizing time (synchroniging meter should be 12'o clock position only. why not 6'o clock position not possible.

1 Answers   ITC Infotech,

---

In Star type and Delta type Motors, If one phase will miss/Break then which phase winding will burn and why?

4 Answers  

---

Simultaneous trip of incoming and outgoing breakers of 400kv/220kv trnasformer. What are the probable causes?

2 Answers  

---

How many earthing pits required for diesel generator set ? Why ?

1 Answers  

---

difference between main metering kiosk and check metering kiosk

0 Answers  

---