Answer / j.l. singh

1.Pressure relieve valve, 2. Oil surge relay,3. Buchltze
relay,4. Breather,5.Auto fire extinguishing(by sprikler)
for big transformers.
Different protection Systems also come under Safety devices.

Answer / maharaja

1.IR VALUE SHOULD BE MORE THAN 3MEGA OHMS FOR 1KV
2.PI VALUE SHOULD BE MORE THAN 1.4
3.TAN DELTA VALUE SHOULD BE LESS THAN .07%
4.ALL TRIPING AND INTER TRIPING SHOULD BE CHECKED.
5.AFTER CHARGING WE HAVE TO CHECK THE NOISE.
6.AFTER CHARGING WE HAVE TO CHECK THE WINDING AND OIL
TEMPERATURE 4 EACH ONE HOUR INTERVAL.

What is the purpose of reactor.why we used in over head line?

2 Answers  

---

Refernce currents are to be generated using refernce cueernts how can this be done

1 Answers   ABC, Wipro,

---

How we can design a cable for a 3phase load.

3 Answers  

---

when we connect a ceiling fan to a inverter's output voltage, it give some noise, why?

5 Answers   Luminous,

---

WHEN THESE TRANSFORMERS WINDINS CONFIGURATION ARE USED? SPECIALLY EXPLAIN REGARDING STEP UP AND STEP DOWN KEEPING IN MIND.AND REGARDING LOAD ALSO. a.star to delta b.delta to star c.delta to delta d.star to star ALSO EXPLAIN WHY V USE 415/415 TRANSFORMERS IN TUBEWELLS?

1 Answers   ABB,

---

what is linear elements

1 Answers  

---

We are preparing another project which involves Waste heat recovery from a 1 MW GE Engine. The Engine in particular gives out flue gas at 487Deg C with a flow rate of 5650 kg/hour and this can be cooled to 180 Deg C. This gives a thermal output of ~ 594 KW that is available for input to VAM via heat exchanger / boiler. Additionally 581 KW will be available from engine jacket water (temperature profile 80/ 80 Deg C and a flow rate of 50m3/hr) Our estimation is that 300 TR of cooling is possible with a suitable VAM machine(s). Please advise what is the most suitable arrangement with maximum TR and min Capital expenditure. plz reply me as early as possible

1 Answers  

---

Can we use both Electrical & mechanical interlock between tow breakers? if yes how, please explain

1 Answers  

---

. How to calculate the Short Circuit Impedance in Transformer? How to calculate the Short Circuit Impedance in Transformer?

1 Answers  

---

For refrigerators the motor current is raised beyond its rating on both conditions when the voltage of the system is more(say 270v) than the rated voltage(220v) as well as when the voltage of system is less(say 160v) than normal voltageof 220v, why explain?

1 Answers   Electrical Tech, UPSE,

---

what is electricial and mechnical interlock.

9 Answers   Control Dynamics, EFS, HP,

---

How to determine the short circuit current for breakers and VCB.

1 Answers   Sabic,

---