parallel operation for tansformer which condition fill fil
for that
Answers were Sorted based on User's Feedback
Answer / surendar
1)same polarity
2)must be same impedance voltage
3)transform ratio must be same
i.e V1/V2=I2/I1=N1/N2=1/K
4)same vector group & phase squence must be same
5)same make
| Is This Answer Correct ? | 1 Yes | 5 No |
What is stepper motor?
What is Phase margin?
Explain what is Zener diode?
If my sfu is 64 Amp & its link is 32 Amp then at what amp.my sfu will trip???
WE know that for Inductor X=2pifL,In DC f=0,then X=0 so,V=IX=0;But In the DC excitation of rotor of AC generator,DC motor field coil which coils are inductor so why does not applying DC voltage short the rotor coil of AC generator and field coil of motor?If it would then DC source might be damaged but it is not happened. Why does the strand conductor of Electrical power transmission line make twist?
installation of subsatation of33kv
In all analog voltmeters or ammeter showing some small size symbols. as well as a star and in star 2no. digit, resister symbol,and other. what is that's meaning ?
how can we minimize the off load losses of a distribution transformer which is required to be energized 24x7 ?? capacity of the T/F is 1250 KVA and off load losses are around 2.0 KW.. can we use capacitor bank at the secondary of such a T/F to overcome off load losses? please elaborate briefly...thanks
What is the purpose of taking Capacitance and Tan Delta Test in Transformer bushing?
How the main bus bar rating of 400kV switchyard with one and half breaker scheme is calculated.
How the field flux is controlled in DC drive ?
What is the voltage gain or transfer function of amplifier?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)