Which type of pneumatic control valve is used mostly Either Air to Open r Air to close the value And guys I need reason for your reason

0 Answers  

---

Explain what are the design considerations for a piping system for the transfer of slurries?

0 Answers  

---

Explain some good strategies for curing tube vibration in shell and tube exchangers?

0 Answers  

---

Explain the reasons of removal of particles from effluent gas?

0 Answers  

---

Name some common problems associated with dilute phase pneumatic conveying?

0 Answers  

---

---

what is the PH value for boiler water.

12 Answers  

---

Is there a difference in mtd (mean temperature difference) between 'e' and 'j' (divided flow) type shell and tube heat exchangers?

0 Answers  

---

Question 90 - In the calculation of the growth of bacteria, absorbance, A in spectrophotometry is used. According to Beer-Lambert Law, A = e x l x c where A is the absorbance of the solution (no unit), l is the distance of light travels through the solution (in cm), e is the molar absorptivity or the molar extinction coefficient [ in L / (mol.cm) ]. For a particular solute and fixed path length : As / Ao = Cs / Co where Ao is the observed signal for a known concentration Co, and As is the observed signal for a sample concentration Cs. (a) For a cell concentration of 560 cells / mL, a spectrophotometre gives an absorbance reading of 1.0. A mixture of concentration 3600000 cells / mL can be diluted in several operations, with each operation having a dilution of 1:20. How many dilutions should be made so that the concentration of this mixture can be calculated within a range of A = 0.0 to 1.0. (b) In another experiment, a sample tube of 1 cm in width is used. Let A = 0.06 and e = 0.0012 ml / (cell.cm). Find the cell concentration of the sample.

1 Answers  

---

why Torispherical heads are used in pressure vessels?

1 Answers   India Cements,

---

have any one question paper of institute of plasma research center for aptitute as well as technical?

0 Answers  

---

Question 70 - According to Adolf Eugen Fick (1829 - 1901) : rate of diffusion v increases with less wall thickness t, increased area A and decreased molecular weight of a fluid M. The diffusion constant D decreased with increasing M. (a) By assuming v, t, dP, A, M and D changes proportionally of each other, find the equation of v as a function of t, dP, A and D. (b) The ratio of self diffusion constant D, at T = 273 K and P = 0.1 MPa, for gases B and C are 1.604 : 0.155. If only 2 gases exist in such a system : hydrogen and nitrogen, find the type of gas for B and C with reference to their molecular weights M. (c) By using the equation of kinetic energy 0.5 MV = constant where V = square of v, find the ratio of V for B and V for C, or V(B) / V(C), as a function of M(B) and M(C), where M(B) is molecular weight of B and M(C) the molecular weight of C : Graham's Law of Diffusion.

1 Answers  

---

what is the role of id fan in a furnace?

3 Answers   Essar, JSW,

---