What are the criteria’s involved in choosing mass balances for components?

0 Answers  

---

Chemical Engineering Energy Balance - Please match the term A - E as follow with the stated definition : A. Yield. B. Selectivity. C. Relative saturation. D. Molal saturation. E. Absolute saturation. i. Answer : ? (moles of desired product formed) / (moles that would have been formed if there were no side reactions and the limiting reactant has reacted completely). ii. Answer : ? (moles of desired product formed) / (moles of undesired product formed). iii. Answer : ? (relative humidity 40 % means partial pressure of water vapour equals 4 / 10 of the vapour pressure of water at the system temperature). iv. Answer : ? (moles of vapour) / (moles of vapour dry gas). v. Answer : ? (mass of vapour) / (mass of dry gas).

1 Answers  

---

POLYMER ENGINEERING - QUESTION 24.3 : The molecular weights M in kg / mol of 3 different monomers a, b and c in a polymer are Ma = 14, Mb = 16 and Mc = 18, with their respective quantities in N units having the ratio of Na : Nb : Nc = 2 : 3 : 5. (a) Find the numerical average molecular weight of the polymer by using the formula (Ma Na + Mb Nb + Mc Nc) / (Na + Nb + Nc). (b) Find the weighted average molecular weight of the polymer by using the formula (Ma Na Ma + Mb Nb Mb + Mc Nc Mc) / (Ma Na + Mb Nb + Mc Nc). (c) Calculate the polydispersity Q by using the answer in (b) divided by answer in (a). (d) Find the volumetric average molecular weight of the polymer by using the formula (Ma Na Ma Ma + Mb Nb Mb Mb + Mc Nc Mc Mc) / (Ma Na Ma + Mb Nb Mb + Mc Nc Mc). (e) Estimate the polydispersity Q by using the answer in (d) divided by answer in (b).

1 Answers  

---

Question 112 - In quantum computing, let the amplitude A = a | 0 > + b | 1 >, | a | | a | + | b | | b | = 1. Find the values of b if A = 0.8 | 0 > + b | 1 >.

1 Answers  

---

We are having proplem with the persperation smell in ETT/ECHO room in our cardiac hospital.The 2 Ton of AC is not conditioning the environment. We have to use exhaust fan to through out of the room bad air. Could anyone suggest how to coup with this effectively using chemical engineering. Any permanent solution to neutralise the bad smell.The Air freshners are not doing enough instead making a bad odour.

0 Answers  

---

i'm a chemical engineer with an aggregate of 80% and i'm going to attend for TCS next week...if i encounter a question like this how i have to answer... WHY YOU CHOOSE SOFTWARE RATHER THAN YOUR CORE COMPANIES?

0 Answers  

---

What are the effects of oils on the properties of Polyolefins?

0 Answers   IOCL,

---

Is there a handy way to determine if a horizontal pipe is running full if the flow rate is known?

0 Answers  

---

how much time will take 20000 liter water to cool from 80-30 0C ? Assume all parameters constant

1 Answers  

---

Question 58 – In the design of a solar power system steps of calculations below are followed : (a) The power output of the inverter of the of the solar panel is 100 watts. What is the power input, Pin to the inverter when the efficiency of the inverter is 50 %? (b) If the rated power of the inverter is 300 watts, how many inverter is needed for the solar panel? (c) Charge controller of V = 12 volts is used to supply power to the inverter. What is the input current I to the inverter? (d) If the charge controller capacity is 10 A, how many charge controllers are needed? (e) If a biochemical mixer consumes 100 watts, running for 2 hours per day, what is the energy consumption in kilowatt hour per day? (f) What is the input energy needed when the efficiency of the inverter is 50 %? (g) If your area receives 2.88 hours of full sunlight per day, how much energy, in kilowatt hour can be produced per day when one solar panel can produce 20 watts of power? (h) If you know that you have to produce total energy as the answer for (f), how many solar panels are needed? (i) Each V = 12 V battery has 5 ampere hours. If the total energy needed is in answer (f), then how many batteries are needed to run the biochemical mixer if without sunlight for 3 days?

1 Answers  

---

Please describe tar, asphalt and bitumine

0 Answers  

---

Explain what are some typical applications for glass-lined reactors?

0 Answers  

---