Answer / suryanaik02@gmail.com

the power consumed can be read from the nameplate of the appliance and this multiplied by the time gives KWH if time were in hours. This divided by 1000 gives the units consumed and multiply this units by per unit charge. Note that per unit charge may be slabs, so that if your usage exceeds certain value, you may have to pay double oor tripple or more charges.
But the basic problem in finding the time of operation of AC is that, it is not easy to predict how much time it wil operate?. It depends on two things. one is the heat load. if you are frequently opening the doors of the air conditioned room, the heat load will be more and the AC will operate more time. Second the hysteresis of the AC. This may either be manufacturer set or user configurable. If it is user configurable, try a wide hysteresis to lower the time of operation of AC and its frequent start/stops. But this sacrifies your comfort.

Answer / antarjyami behera

1000 watt=1kw,1000wh=1kh, 1kh= 1unit

in transformers for ex. 100mva and 400kv the secondary current is about 420 amps but for selection of bushing the capacity of selected bushing is 2000A why there is such big difference ?

2 Answers   ABB,

---

why protection meter is always connect to star

1 Answers  

---

In a dc series motor increases in lord current results in

4 Answers  

---

How much CTs are required to measure th curent in DOL starting of motor?PLs explain.

1 Answers  

---

wat is the importance of reactive power in power generation.....if it is zero means wat will happen to system........

22 Answers   Bhel, Jindal,

---

A 150KW 440V motor is need to replace in the field instead of faulty one. what are the main parameter should I need to check?

1 Answers  

---

For Electrical / and Electronic Systems, when we say efficiency is 80%, then what happens to other 20% from the Power consumption.? I.e. what happens to this?

1 Answers  

---

How does a transformer contribute towards the widespread popularity of ac system over dc?

0 Answers  

---

What is the use of Surge Capacitor in LAVT?

1 Answers   Snipe Engineers,

---

How is earthing done in Aerospace applications such as Flights and spaceships..?

1 Answers  

---

In control room of our one plant there is a continuously the incoming power goes to PC is vary,means in stabilizer it continuously indicate from high input to low and low input to high. what is the reason and its solution.

0 Answers  

---

I WOULD LIKE NOW WHY WE CANT USE SOME CT FOR MESARING AND PROTECTION

2 Answers  

---