Answer / baadri

batteries in parallel increase the current rating...but the condition is that voltage of two batteries should be same.....

Answer / hari prasanth

Batteries connected in series:
Let us consider that we need to light a lamp of 24 V.
So we can use 4 six volt batteries which can be connected in series to constitute 24 V.(4 batteries * 6 V =24 V).
Advantage:
Batteries connected in series provide higher voltage with same capacity.
Batteries connected in parallel:
Consider the same scenario.
If four 6 V batteries are connected in parallel it will provide 6 V only.Also any any one is damaged (short circuited) it will become 0 V.
So it is mandatory to get 24 V battery.
Advantage:
Batteries connected in parallel provide same voltage but double capacity.

Posted by Hari Prasanth.G

What is the cause for a blown fuse in one phase of primery side(HV) of a three phase transformer( 4169v-460v) in the time of closing its supply breaker. There is no load on the secondery side of the transformer in this moment.

3 Answers   Novachem,

---

Brief difference btween aluminium & copper conductor

2 Answers  

---

What is mean by vector group? For what purposes we doing vector group test in transformers?

2 Answers  

---

define reactive power?

3 Answers   Alstom, TATA, TCS,

---

tell me some type of questions throught which i can prepare for exam and do my best

0 Answers   Jindal,

---

what is the difference b/w neutral and earth?what is the need of earthing and what are the different methods for earthing?

4 Answers   NTPC,

---

why capacotors burnt out

2 Answers   GMR,

---

What is cable gland,why does use for?

5 Answers   ABB,

---

What is the GNA & MNA in armature reaction of Dc Generator

2 Answers   Khetan,

---

what is the principle of tubelight ??? what is the function of starter and choke ???

1 Answers  

---

wat's the procedure to take short circuit current for cable selection

0 Answers  

---

We have 2 Nos. Transformer with the capacity of 2000KVA and 1250 KVA and currently using only one 2000KVA T/R during operational hours while non- operational hous 1250 KVA T/R also used to reduce T & D losses. Similarly, 2 capacitor bank of 500KVAR and 300 KVAR also installed to balance reactive power. Now problem is around 1000 KW load PF is not maintaning 0.99 as 350 KVAR capacitor is in healty condtion. Now the PF is maintain 0.95 to 0.96.

2 Answers  

---