kVA rating of open delta connected transformer is ____

kVA rating of open delta connected transformer is _____% kVA
rating of delta/delta connection
A 50 B 70.7
C 57.7 D 75.7

Question Posted / parthjoshi

2 Answers
4826 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

kVA rating of open delta connected transformer is _____% kVA rating of delta/delta connection A 5..

Answer / sanket d. patel

57.7

Is This Answer Correct ?

1 Yes

0 No

kVA rating of open delta connected transformer is _____% kVA rating of delta/delta connection A 5..

Answer / jinesh patel

57.7

Is This Answer Correct ?

0 Yes

0 No

Post New Answer

More Electrical Engineering Interview Questions

along with technical test papers

0 Answers Vee Technologies,

Dear Friends, I have a 500KVA transformer supplying whole factory having 3 phase and single phase mixed loads. Power room has ammeters connected via CTs for individual phase. Now I know that readings shown on meter for each phase say R,Y and B are line currents. But when I want to know the total on transformer do I need to add the currents of all three phases readings shown on meter or value for anyone phase will give me the correct power load on transformer for that point of time. 2. If ammeter shows unbalanced readings for R,Y, B phases say 150, 250 and 300 respectively so can I assume that 150A i.e average of 3 will be the 3phase load currents and remaining will be 1phase currents. Please clarify my doubt.

4 Answers

why voltage drop if we have connected 230 v ac suplly through diode to bulbe we found haft ie 110 voltage drop why it is

4 Answers

What is the purpose of stand by earth fault protection for transformer ?

0 Answers

Difference between on line capacitor and Station type capacitor.

1 Answers

what will happen if dc is supplied in acb or mccb or other circuit breakers?

1 Answers

What is bushing?

4 Answers

how do i commission a distribution transformer knowing all its ratings and transformation ratios?d

1 Answers

How to calculate Number of Earthing Pits....???

0 Answers

We have 5 Distribution sections with variable loads&We have 3 Gensets(500kva,380kva&250kva) our total load is between 400kva to 600kva. so how could we connect 3gensets.

0 Answers

Pls explain about vfd control?Where it is used, Give some example?

3 Answers Siemens,

in a solar power plant,we are going to step up the voltage 350V to 33kv, and to 132kv GSS. i want to ask that if it is possible that 315v/33kv is not possible because we also use 315v/11kv. or it should be 415v/33kv? is it effects generation or losses? the second question is-generation is depends on LV winding? or LV winding design for generation voltage?

0 Answers

For more Electrical Engineering Interview Questions Click Here