Answer / raghavan

0.019m3 of cement,0.12m3 of sand

Answer / nilesh kulkarni

Area
10 12 120 Sqft


Assume 100 Sqm of surface area for plastering
Thk = 0.015 X 100 = 1.5 Cum is the Qty of Plaster
Add 55% for (Bulkage,Uneven surface,Wastage etc)
1.5 X 55% = 0.825
Add It In 1.5 Cum 1.5 + 0.825 = 2.325 Cum is the Qty of Plaster
Ratio 1:6
So 2.325 Divideded (1+6) = 0.332 is the Constant For Material

Cement is 1 Part 1 X 0.332 = 0.143 Cum
Multiply By To Convert Into Bag = 28.8
No. Of Bags = 4.114 Bags Say 4.2 Bags For 100Sqm Surface Area

Sand 6 Part 6 X 0.332 = 0.857 Cum Say 0.85 Cum For 100Sqm Surface Area

0.47 Bags Cement For 120 Sqft Area

0.095 Cum Sand For 120 Sqft Area

Answer / anil

how calculate sand

how the calculatio is taken for shuttering in staircase.

1 Answers   JMC Projects, Tech Mahindra, TechnoArt,

---

what is a moment connection and shear connection ? where it provided ? why it provided ?

1 Answers  

---

which one is economical construction brick masonry or sold block masonry?

3 Answers  

---

How many material do I need to finish a 340sqms using 190 block size and 700mm x 450mm x 200 mm concrete including of outside and inside plastering

0 Answers   Home,

---

how to calculate Tile skirting

5 Answers   JMC Projects,

---

howto calculate the quantities of material used in fly ash brick after finding the volume??

0 Answers  

---

is concealed wiring a problem in fly ash brick wall?

0 Answers   Earthstone Infra,

---

1.WHERE THE SLAG CEMENT IS MAINLY USED. 2.FOR GOOD CONCRETE MIX OF M20 GRADE , CAN IT BE USED? 3. I WE USE FOR BRICKWORLiK AND PLASTERING ANY DISADVANTAGES?E

2 Answers  

---

fluid flow takes place due to its:- viscosity,comprssibility,surface tension,deformation undershear force

3 Answers   SSC,

---

As per Kandal suggestions, we have implemented rolling starts on 140 (+/- 5) degrees and we kept 3 rollars to complete the rolling before falling 125 degrees and the Aggregate AIV is below 22. But When the DBM bed is being rolled 3rd high viabration, (Before 1 plain & low ,2 high Viabrations), the aggregate is getting sharp edge agg. projections are damaged. As the literature is said that, the VG-30 Grade having better control the temp. susceptibility than Penetration grade. if so we could not get this problem at site. But we are facing on site. let me know.

0 Answers  

---

Which IS code is saying the detail of deshuttering period?

3 Answers  

---

How we calculate the service time of buildings

0 Answers   SPML,

---