Answer / amritpal singh sidhu

DC machine is of two types: 1. DC Motor; 2. DC Generator
DC Motor:- Whenever a current carrying conductor placed in
magnetic field, it will experience a force.

DC Generator:- Electromagnetic Induction.

Answer / vishal ingle

DC machines are broadly of two types viz Motor or generator.

Both works on the principle of electomagnetic induction.

Generator:- Due to relative motion between magnetic flux
and winding, an emf is induced in it.

Motor: Due to the current flowing through the winding and
magnetic field flux, a force is experienced by the
conductor.

Answer / anjali

DC generator:It works based on the principle of Electro magnetic induction.Whenever there is a relative motion between the conductors and the magnetic field,emf is induced in the conductor.When this circuit is closed current flows in it....

Answer / raja

2 principles
1 is hetropolar
In the case of a hetero-polar generator the
induced emf in a conductor goes through a
cyclic change in voltage as it passes under north and south
pole polarity alternately.

2 is Homo polar
Even though the magnetic poles occur in pairs,
in a homo-polar generator the conductors
are arranged in such a manner that they always move under
one polarity. Either north pole
or south pole could be used for this purpose. Since the
conductor encounters the magnetic
flux of the same polarity every where it is called a homo
polar generator.

Answer / guest

DC machine are both motor/ generator works on
electromagnetic induction principle
MOTOR:
The current carrying conductor placed in magnetic field the
force exist on that conductor.according to Faraday laws of
electromagnetic induction principle.field indicates Flemming
left hand rule

GENERATOR:
When ever a conductor cuts the magnetic field the an EMF
Induced that conductor.according to Faraday laws of
electromagnetic induction principle.field indicates Flemming
Right hand rule

How can you limit the fault level in a power system?

1 Answers   Alfanar,

How damper winding in synchronous motor suppress Hunting?

2 Answers   Bhel,

On load tap changer (OLTC) explode? Transformer Vector group: Ynd11 Rated Power: 353MVA Rated Current: 693A Voltage:294/20KV OLTC Type: T III Y1000 110/c 12193w Max Operation Current: 295A Step Voltage: 550V Arrangement in Tx windings: Y Connection Problem: Damage of Unit 1 Generator Transformer On Load Tap Changer (OLTC) Description of Incident: 9.00 a.m. :- Generator No Load test on excitation system started 10.30 a.m :- Carried out AVR change over test 11.30 a.m :- Preparation for Generator Manual Synchronizing test 12.00 a.m :- Manual Synshronizing test started. Observed incoming generator voltage higher than running voltage. CECR operator operated Generator Transformer OLTC to bring down the incoming generator voltage 12.03 a.m :-Generator Transformer abnormal alarm operated at Gen.Control Desk (CECR) CECR operater at Generator transformer bay informed that the transformer oil splashed out from OLTC. CECR operater informed that he heard explosion inside OLTC. Observed Oil level & Oil Flow alaram operated at Tranformer local annunciator. 12.05 am :- CECR operator 'Open Gen Field Breaker” 12.10 a.m. :- Elec1 team inspected the OLTC and found the OLTC rupture disk was broken and oil spilled at OLTC area. - Elec1 found the OLTC top cover bulging. Do anyone know why and possibility cause happen in this OLTC.

9 Answers  

how can service sitting be setted for MCCB?Example for sittings IR (CURRENT RATING),IS(CURRENT STARTING) I O (current operating)?

0 Answers  

As per the theory current doesn’t flows in Neutral, but practically it is not applicable, explain why?

3 Answers  

why earth hole size is biggest in plug point?

22 Answers   Al Qabas, HCL, RRB,

what is divercity factor?

4 Answers   ABB,

What is the major difference between cnc and plc. why cant we use plc instead of cnc

5 Answers  

which motor have relatively high power factor and what is reason for have high pf? 1.capacitor run motor 2.shaded pole motor 3.capacitor start motor 4.split phase motor

0 Answers  

What is the purpose of starter and choke in tube light?

9 Answers   Chimay Brewery, TATA, TSPL,

What is the kiosk parts, about them and their functions ? If anybody have some PDFs files or details about this plz send it on tawhidfaisal@Yahoo.com

0 Answers  

What kind of test is conducted commonly for generator? And explain briefly

1 Answers   MAHINDRA,