Answer / rajesh

there is no different formula for inusalted pipe
the same formula which is presented in 11 th chapter of
mcabe can be used but u need to include the insulation
details in caluculating

Answer / ekwunife ifeanyi fredrick

1/1/hi+In(ro/ri)/x+1/ho

why u opted for chemical engg?

2 Answers  

---

In Distillation Process heat transfer and mass tansfer will occur or not? alsowhere it will takes place?

2 Answers  

---

did sulphur been a byproduct after the combustion of LPG and Natural Gas

3 Answers  

---

how to calculat suction head in centrifugal pump?

2 Answers   IOCL,

---

Question 68 – Biochemical Oxygen Demand (BOD) could be calculated using the formula BOD = (DOi - DOf) (Vb / Vs) where Vb = Volume of bottle in ml, Vs = Volume of sample in ml, DOi = Initial dissolved oxygen in mg / L, DOf = Final dissolved oxygen in mg / L. (a) By using a bottle of Vb = 300 ml with sample Vs = 30 ml, find the BOD if DOi = 8.8 mg / L and DOf = 5.9 mg / L. (b) By using a bottle Vb = 600 mL with sample Vs = 100 mL, find the BOD if DOi = 8.8 mg / L and DOf = 4.2 mg / L. (c) Find the average BOD = [ Answer of (a) Answer of (b) ] / 2. (d) If the BOD-5 test for (a) - (c) is run on a secondary effluent using a nitrification inhibitor, find the nitrogenous BOD (NBOD) = TBOD - CBOD. Let TBOD = 45 mg / L and CBOD = Answer of (c).

1 Answers  

---

A distillation column separates 10000 kg / hr of a mixture containing equal mass of benzene and toluene. The product D recovered from the condenser at the top of the column contains 95 % benzene, and the bottom W from the column contains 96 % toluene. The vapor V entering the condenser from the top of the column is 8000 kg / hr. A portion of the product from the condenser is returned to the column as reflux R, and the rest is withdrawn as the final product D. Assume that V, R, and D are identical in composition since V is condensed completely. Find the ratio of the amount refluxed R to the product withdrawn D. Hint : Solve the simultaneous equations as follow in order to find the answer (R / D) : 10000 = D + W; 10000 (0.5) = D (0.95) + W (0.04); 8000 = R + D.

2 Answers  

---

What is the reason for removing silicon from aluminum?

3 Answers   IOCL, ONGC,

---

CHEMICAL FLUID MECHANIC - EXAMPLE 3.2 : The terminal velocity of a falling object, v is given by v = sqrt [ 4g (R - r) D / (3Cr) ] where sqrt is the square root of, g = 9.81, D = 0.000208, R = 1800, r = 994.6, m = 0.000893. The Reynold number, L is given by L = rD (v) / m. The C for various conditions are : C = 24 / L for L < 0.1; C = 24 (1 + 0.14 L^0.7) / L for 0.1 <= L <= 1000; C = 0.44 for 1000 < L <= 350000; C = 0.19 - 80000 / L for 350000 < L. Find the value of v for the situation above by trial and error, ^ is power, <= is less than or equal to.

1 Answers  

---

how to calculate material balnce & energy balnce

7 Answers   MahaGenco, Oil India, ONGC,

---

Explain the working of a spray condenser?

0 Answers  

---

hi can u send me all d technical qus pepar of DRDO?my email id is palmzk@gmail.com

0 Answers  

---

Jspl question paper for freshers requirements chemical engineering diploma

0 Answers  

---