Answer / robbie thakur

Specific fuel consumption of any diesel generator can be
determined by following formula

Specific fuel consumption = units generated by
generator/diesel consumption to generate these units

=units(kwhr)/diesel(ltr)


for example a generator cosume 48 ltr diesel to generate
167 units then it,s sfc (specific fuel consumption ) will
be= 167/48= 3.47 it means it will generate 3.47 units
in one ltr diesel.

Answer / nadeem pravej

Desial generator/diesel consumption to generate Two tipe 1-%load less then 85
So kva¤1.5
2-%load above then 85 
So kva¤12.1

why any surge protection is not provided to UHV ac transmission line (765kv) ?

1 Answers   NK Power Systems, Reliance,

---

What is the differentional relay...what is the work of this in power Tx. how it is works..

0 Answers   ABB,

---

conditions for parallel operation of dc generators

4 Answers  

---

in transmission line, if the load is suddenly increased at the receiving end of the system the phase shift will (a)decrease (b)becomems zero (c)increase (d)not be affected

4 Answers   Getco,

---

Why is voltage is required to be within permissible range for an electrical equipment?

0 Answers  

---

in case of induction motor when overload condition or any short ckt. why stator winding burn not to be rotor winding

2 Answers  

---

How the size of electic machine vary with the sped? Between slow and fast running machines of equal ratings, which one is more economical to design?

1 Answers  

---

60 watts bulb and resistor home heater is connected in series and 230v is given to the circuit. The heater is giving some amount of heat. If instant of 60 watts bulb replace 100 watts bulb what will be the output of the heater?

2 Answers   NPCIL,

---

The SFC of an engine is 0.25 kg/kW hr. when the fuel used has a calorific value of 36000 kJ/kg. the thermal efficiency of the engine is

0 Answers   Caterpillar,

---

in a large three phase induction motors usually the value of full load slip is

1 Answers   PSEB,

---

The neutral&earth voltage is 0v.But we were connected the lighting load at the time ballast was failed.why?

1 Answers  

---

What is tranformer differtial?

0 Answers  

---