Answer / r.baghel

1.Corrective Maintenance
2.Preventive Maintenance
3.Planned (Sheduled) Maintenance
4.Annual Maintenance

Answer / praveen kandwal

1.break down maintenance
2 preventive maintenance
3 corrective maintenance
4 predective maintenance
5 cndition based maintenance

Answer / devisathya

1.preventive maintenance
2.corrective maintenance
3.predictive maintenance
4.condition based maintenance
5.breakdown maintenance

Answer / ram pratap yadav

1 preventive maintenance
2 corrective maintenance
3 predective maintenance
4 cndition based maintenance
5break down maintenance

Answer / tgrprasath

preventive maintenance
breakdown maintenance
predictive maintenance
time based maintenance
corrective maintenance
condition based maintenance.,.,.,

Answer / vinay mishra

Basically there are only three types of maintenance i.e.
1. Preventive maintenance
2. Predictive maintenance
3. Reactive Maintenance

Preventive maintenance - Every parts connected with a machine have a particular life in the terns of running hour, After this life the running of equipment there is big chance to failure of parts / equipment catastrophic risk etc The life of spare parts we find either by manual of machine or the vendor who manufactures the machine .after finding the original life we make a schedule to perfoem the maintenance activity of each parts as per their respective running hour to avoid breakdown .

Predictive maintenance - in this type of maintenance we predict the condtion of equipment as per schedule . Mostly condition measuring tools of equipment are viberation, temp. , Thickness ,flow , noise ,lubrication wear particle analysis .Initially we make a base line for these parameter for correct operation and compare it with as per predictve schedle data found . any sudden change in parameter will alert us to take maintenance of equipment and by this we avoid breakdown .

Reactive maintenance - Some time it is called as Break down Maintenance

Answer / harish k k

reactive maintenance
corrective maintenance
predictive maintenance
preventive maintenance
breakdown maintenance
scheduled maintenance
condition based maintenance

Answer / isha verma

1. Breakdown maintenance:

It means that people waits until equipment fails and repair it. Such a thing could be used when the equipment failure does not significantly affect the operation or production or generate any significant loss other than repair cost.

2. Preventive maintenance ( 1951 ):

It is a daily maintenance ( cleaning, inspection, oiling and re-tightening ), design to retain the healthy condition of equipment and prevent failure through the prevention of deterioration, periodic inspection or equipment condition diagnosis, to measure deterioration. It is further divided into periodic maintenance and predictive maintenance. Just like human life is extended by preventive medicine, the equipment service life can be prolonged by doing preventive maintenance.

2a. Periodic maintenance ( Time based maintenance - TBM):

Time based maintenance consists of periodically inspecting, servicing and cleaning equipment and replacing parts to prevent sudden failure and process problems.

2b. Predictive maintenance:

This is a method in which the service life of important part is predicted based on inspection or diagnosis, in order to use the parts to the limit of their service life. Compared to periodic maintenance, predictive maintenance is condition based maintenance. It manages trend values, by measuring and analyzing data about deterioration and employs a surveillance system, designed to monitor conditions through an on-line system.

3. Corrective maintenance ( 1957 ):

It improves equipment and its components so that preventive maintenance can be carried out reliably. Equipment with design weakness must be redesigned to improve reliability or improving maintainability

4. Maintenance prevention ( 1960 ):

It indicates the design of a new equipment. Weakness of current machines are sufficiently studied ( on site information leading to failure prevention, easier maintenance and prevents of defects, safety and ease of manufacturing ) and are incorporated before commissioning a new equipment.

Answer / jai prakash sharma

Breakdown Maintenance
Preventive Maintenance
Predictive Maintenance
Total Productive Maintenance
scheduled maintenance
reactive maintenance
corrective maintenance

Answer / kiran

figure maintenance
body maintenance

what is the technology used in sap?

0 Answers   InFocus, Infosys,

Mention some of the major contributions made by you in your present and previous jobs:

0 Answers  

What is the purpose of increasing the pressure on the F.O. system of the engine?

0 Answers   RRB,

We select 10mm nominal thickness for Elip head of a pressure vesel. The minimum thickness after forming is 8.2mm. (Shell thickness is 8mm. The minimum thickness after forming is satisfied or not with UG-79 (d)(3) in ASME SECTION VIII, Div.1?

0 Answers   PetroVietnam,

What is the difference between column and strut ?

0 Answers  

Why you consider yourself suitable for the post

0 Answers  

What is the use of multi tester?

0 Answers   RRB,

Iam a 2006 graduate and applying for ms degree course in USA for spring 2010.I have also received i20 from universities.I also have work experience as a cad engineer for almost 2.6 yrs. please tell me what kind of questions can be raised by US Consulate for my situation and how to answers them.

1 Answers   US Consulate,

please send all previous solved question papers on HLL......

0 Answers   HLL,

Why are open the ejector air vents.

0 Answers  

eligibity for TNPSC group 1 exam , age limit

0 Answers  

what is the basic optimal difference among isothermal,isentropic and adiabatic processess( with charts of each)??

0 Answers   BARC, NTPC,