Answer / ankur

RMU-Ring Main Unit
It consists of Isolator-Breaker-Isolator configuration.
The RMU is used in the 11 kV HT Power network.

The RMU is using SF6 gas for the arc quenching medium. All
the two isolator and one breaker are in the one chamber
having SF6 gas.

The breaker is having O/C and E/F protection using relays.
The isolator is being used for the operation on ON LOAD due
to the SF6 gas medium.

Answer / sunil jaiswar

RMU is used for redudancy feeder purpose with 2inputs
electrical interlock & one outgoing to the load

Without seeing the nameplate descriptions of a rotating machine,Is it possible to say which one is a motor and which one is a generator? How would you certain this?

3 Answers  

---

what is the function of LBB relay

9 Answers  

---

explain how hunting can be reduced in an alternators?

3 Answers  

---

What are the different types of VVVF Drive ?

2 Answers  

---

what is Micrologic 6.0A advantages over Micrologic 2.0A

1 Answers  

---

How to find knee point voltage in current transformer?

2 Answers   TCS,

---

make control wire diagram of start and stop a function with a single push button

1 Answers   Sona,

---

if 2500 KVA TRANSFORMER CAPACITY.33KV INCOMING HOW ARE AMPEAR PRIMERY SAID

3 Answers   Cipla,

---

Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?

0 Answers  

---

In Slip ring Induction Motor we use Liquid Rotor Starter for Starter Every Time Liquid Filling we need add Soda Sodium Carbonate or only Distilled water is Enough.

2 Answers  

---

is this the formula of building wiring to get the main breaker.Watts/volts*.8%+higher motor*(25%)=ampere. yes or no or send the correct formula for building wiring.

0 Answers  

---

If the capacitor bank is installed in switchyard say 132/22kv then on LT side say 22kv/0.433kv is it necessary to install capacitor bank for maintaining power factor. if pf is maintained on HT side then will that be maintained on LT side as well.if not then how&why??????/ please explain...........

3 Answers   MacLellan,

---