Answer / raghavendran

Real power refers to the power that is available to the load
or in other words a power is presently being generated.It
depends upon the load power factor.

Apparent power is the maximum power which, a source is
capable of generating at unity power factor.
for Ex : sqrt3* V*I*COS(phi)keeping v = 20 kv and I=20000A
and COS(phi)= 1
we get Apparent power = 692 MVA
where as for COS(phi)= .85 we get 588 kw which is real power

reactive power is something which is not consumed by the
load.It is available circulating in the grid
always.Depending upon the load connected,it is either
rejected into the grid or absorbed in.

Answer / bpr

* Real power (P) — watt [W]
* Reactive power (Q) — volt-amperes reactive [var]
* Complex power (S) — volt-ampere [VA]
* Apparent Power (|S|), that is, the absolute value of
complex power S — volt-ampere [VA]

Answer / asad durez

Real power mean actual power that is equal to
+92-334-9107748
p=vicos@
and it is as known as watt or kilowatt.

and active power mean the rating of a machine.it is equal to
only
VI
and it is as known as VA or KVA

and the Reactive power is equal to
KVAR
mean kilo volt ampere Reactive
KVAR=kva*sin@

HAI,I HAVE 6,60KW MOTOR FEEDERS IN MY MCC PANEL.HOW CAN I DO MY SETTINGS FOR OVERLOAD,SHORTCIRCUIT,GROUNGFAULT,INSTANTANEOUS TRIP FUNCTION IN MY 4000A CIRCUIT BREAKER?

1 Answers  

---

HOW WE CALCULATE CURRENT IF THERE ARE NOT PRESENT ANY AMMETER OR MULTIMMETER??????

0 Answers  

---

HI....HOW CAN BE MESARED THE VALVE OF NEUTRAL GROUND RESISTOR WHIC IS LOCATED AT SWICHGEAR ON GENERATOR SIDE....

0 Answers   Jindal,

---

Define cut-off rate?

0 Answers  

---

When and where resistance earthing is used ? How to calculate the time constant for earth fault

0 Answers  

---

Why motor initial starting current is high?

9 Answers   Pennar,

---

block diagram of 2 ups system connected in parallel mode?

0 Answers  

---

can we use ac ameter as dc ameter with ct

1 Answers  

---

length of 4 core cable 95mm from substation LV VFD panel to Motor at field approximately 150 meter. Motor stop and power has been isolated from LV MCC ( Substation )to disconnect Motor for services. After Motor completed service propose to reinstall and reconnect Motor Cable, found earth cable sparkling during touching at metal / motor body. Inspect by clamp meter found earth cable have current flow AC 1-2amps and all earth cable at MCC LV also have current flow as same value. why it is happen?

2 Answers  

---

What is the use of Surge Capacitor in LAVT?

1 Answers   Snipe Engineers,

---

should dc supply will give the transformer to build up the voltage level

1 Answers  

---

why we are having many type of vector group in the transformer ,what is the use of it?

2 Answers  

---