What"s the brick size we use in construction?1.190x90x90
2.230x100x75 Which one "s correct?
Answers were Sorted based on User's Feedback
actually,190x90x90 mm this is the MODULAR BRICK size which
is define by the BIS.
This size we can't obtained in construction.
in the question the size of the commercial brick is not
given correct.
22.3x10x7.5cm is the brick size we use in construction.
| Is This Answer Correct ? | 29 Yes | 3 No |
Answer / p s butola
In General Construction in north india Brick size used is
230*115*75mm
| Is This Answer Correct ? | 12 Yes | 1 No |
Answer / praveen kumar
In General Construction in north india Brick size used is
230*115*75mm
| Is This Answer Correct ? | 11 Yes | 1 No |
Answer / bharath m,+91 8438238335/99806
This is the correct one as 230x100x75 mm for all over india
| Is This Answer Correct ? | 5 Yes | 0 No |
Answer / nadim abdulgafur shaikh
230x100x75 is the answer as the question was about bricks
| Is This Answer Correct ? | 0 Yes | 1 No |
What are the different types of civil engineering?
What is the difference between Stress & Strain?
what is the cost of rcc roof casting of 400 sq. ft. in kolkata
if a pipe those configuration (ASTM c 76 class b 450mm dia 2500mm length) fixing for water course those lining of water is 7000 running meter. my question is that if 8 joints of pipe ls leakage and we have not permission to stop the water so which treatment we apply on joint in that in condition.
why we are condecting the slump test for concrete?
What quantity of 1.0 m3 bricks required?
Plz tell me...column and wall section drawing.
If 16 mm dia hysd bar of grade Fe500 is needed in a beam but it is not available in the construction site but the beam has to cast in an emergency. Which dia of bar is to be used for for that situation? (If greater than 16 dia bar is not available at site)
DESIGN PROCEDURES OF R.C.C ELEMENTS
what are the cube & Sylinder strength of concret M20,M25,M30,M35,M40,M60 ,M75,M10 ,M15
In which code the the maximum height of concrete casting has been explained
what are the minimum compressive strength required for the concrete cube for different grades & different days .Please give me an answer.
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)