1 liter emulsion paint covered how much area?
Answers were Sorted based on User's Feedback
Answer / nazim saifi
1 litre will cover approximately 11 square metres.
Is This Answer Correct ? | 91 Yes | 26 No |
Answer / mohana rao
How much area, in square meters, will one liter of paint cover if it is brushed out to uniform thickness of 100 microns?
1 litre of paint = 1000 Cubic Centimetre (CC)
Volume = area * thickness
1 liter = 1000 cc (cubic centimeters) = 1000000 cubic mms
1 Micron = 1/1000 mm
100 microns = 0.1 mm
Area = 1000000/0.1
Area = 10000000 sq mms
Area = 10 sq meters
Also in British Units
2.54cm = 1 inc
1 metre = 100 cms
1metre =100/2.54 = 39.37 inch
Also 1 square metre = 1m x 1m = 39.37 inc X 39.37inc = 1549.9969 sq inch
12 inch = 1 foot
1 sq feet = 12 inc X 12 inc = 144 sq ft
1 sq metre = 1549.9969 sq inch = 1549.9969 / 144 = 10.76 sq ft
So 1 litre of paint can cover an area = 10 sq meters =10 x metre x metre
= 10 x 10.76 sq ft = 107.6 sq ft
Finally one litre of paint can spread with a brush with 100 micro thickness
either 10 sq metre or 107 sq feet
Practically take it @ 90% calculation value because of various factors
Is This Answer Correct ? | 41 Yes | 4 No |
1 ltr. paints covered 80sft to 100 sft area.
Is This Answer Correct ? | 33 Yes | 15 No |
Answer / vigneshwaran s
It may be 100 to 105 Sq.ft (incl.Wastage)
Regards,
Vignesh selvaji (VGN).
Is This Answer Correct ? | 12 Yes | 2 No |
Answer / santhosh
approx of 85-100 s.ft and asian and dulux cover better
Is This Answer Correct ? | 9 Yes | 2 No |
Answer / sachin
Everyone pls check physically
It's 60 Sq. Ft . / ltrs.
Asian Paint OBD immultion paint
Is This Answer Correct ? | 4 Yes | 0 No |
Answer / vikram
1 litre paint cover 100sqft to 115 sqft area in 1 coat of paint.
Is This Answer Correct ? | 4 Yes | 1 No |
Hollow block masonry in cement mortar 1:4, 40×20×20cms in superstructure take 10sqm.I want calculation of brick sand
shearing strength of cohesionless soil depends upon dry density rate of loading confining pressure all above
What is the procedure of Waterproofing in toilet sunken area ?
What is water/cement ratio? Importance in construction?
How to calculate quantity of cement , sand and granite from concrete mix ratio and volume of work
hook and bend length in reinforcement?
how much binding wire required per tonne slab beam columns
what is the Purpose of Adding 20% of wet mortar & 1/3rd to Dry Mortar for PCC & Plastering & Rcc .is there any standard method for adding this .?
What is gauge and gage
how to calculate triangular ring cutting length
HOW to calculate Rate analysis of M15 GRADE DESIGN MIX RATIO 1:2.5:5 WITH 40MM Size aggregates for 1 cumtr.
what is a civil enggineer ?