What are the steps required to design a vapor-liquid separator or flash drum?

0 Answers  

---

ENGINEERING MATHEMATICS - EXAMPLE 8.2 : In the US (United States), one barrel is equal to 42 US gallons and equivalent to 0.15898 cubic metres. One British barrel is equal to 36 Imperial gallons and equivalent to 0.163659 cubic metres. If an oil refinery in England sells 42 Imperial gallons of crude oil to a company in US, how much US gallons of crude oils has been sold?

1 Answers  

---

Question 80 - Liquid octane has a density of 703 kilograms per cubic metre and molar mass of 114.23 grams per mole. Its specific heat capacity is 255.68 J / (mol K). (a) Find the energy in J needed to increase the temperature of 1 cubic metre of octane for 1 Kelvin. (b) At 20 degree Celsius, the solubility of liquid octane in water is 0.007 mg / L as stated in a handbook. For a mixture of 1 L of liquid octane and 1 L of water, prove by calculations that liquid octane is almost insoluble in water.

1 Answers  

---

Plz if anybody has placement paper of HAL mail me i m Chemical engg my id er.kotnala@gmail.com

0 Answers   HAL, IOCL,

---

PETROLEUM ENGINEERING - QUESTION 25.1 : Fact 1 : Dry air contains 20.95 % oxygen, 78.09 % nitrogen, 0.93 % argon, 0.039 % carbon dioxide, and small amounts of other gases by volume. Fact 2 : Volume occupied is directly proportional to the number of moles for ideal gases at constant temperature and pressure. Fact 3 : 12.5 moles of pure oxygen is required to completely burn 1 mole of pure octane. Fact 4 : Air-fuel ratio (AFR) is the mass ratio of dry air to fuel present in a combustion process such as in an internal combustion engine or industrial furnace. Fact 5 : Molecular weight of oxygen gas is 31.998 g / mole and molecular weight of nitrogen gas is 28.014 g / mole. (a) Find the molar ratio of nitrogen and oxygen, or (moles of nitrogen) / (moles of oxygen) in dry air, by assuming ideal features of nitrogen and oxygen gases. (b) How many moles of nitrogen are available if dry air is used to completely burn the 1 mole pure octane? (c) Find the mass of fuel of 1 mole of octane with molecular weight of 114.232 g / mole. (d) Find the mass of dry air with 12.5 moles of pure oxygen by assuming only oxygen and nitrogen gases exist in the air. (e) Find the air-fuel ratio (AFR) when octane is used as fuel. (f) Find the fuel-air ratio (FAR) when octane is used as fuel.

1 Answers  

---

What are the assumptions made for kynch theory?

0 Answers  

---

types and working of compressor

1 Answers   IOCL,

---

Explain what is a good way to get started in doing a plant-wide steam consumption analysis?

0 Answers  

---

HEAT TRANSFER - EXAMPLE 5.3 : In a cylinder with a hollow, let a is outside radius and b is the inside radius. In a steady state temperature distribution with no heat generation, the differential equation is (d / dr) (r dT / dr) = 0 where r is for radius and T is for temperature. (a) Integrate the heat equation above into T(r) in term of r. (b) At r = a, T = c; at r = b, T = d. Find the heat equation of T(r) in term of r, a, b, c, d.

1 Answers  

---

How to caliculate the boil up rate, dia and height in both packed and tray distillation columns and any referance books for the design.

0 Answers  

---

Hi.. Me going to tke test for management trainee(technical) Post I am an chemical engineering student . Can u guide how to prepare for this test.Can u send me test paper pattern..?

0 Answers  

---

Please convert 1 kg (mass) of Liquid LPG into Ltrs (volume) of LPG Vapor.

2 Answers   Wak gas,

---