how many types of ratings are there of transformer
Answers were Sorted based on User's Feedback
Answer / fernandez
Ratings are provided for normal cooling and forced cooling.
Usually for the same transformer, you will get a higher
rating with forced cooling than with the normal cooling.
Is This Answer Correct ? | 6 Yes | 3 No |
Answer / pknam
Rating of transformer is only to define the capacity of any
transformer and the rating can be up to any VA or KVA or MVA.
Cooling of Transformer is not related with KVor VA. It is
only for the best efficiency of transformer. Cooling fan and
other cooling arranement to keep winding cool and To load
the transformer up to its maximun capacity.
Is This Answer Correct ? | 3 Yes | 0 No |
Answer / raul
TRANSFORMER RATINGS :
1.rating in (MVA)
2.no. of phases
3.frequency
4.voltage ratio
5.%age imepedance
6.type of tap changer
7.tappings range
8.type of cooling
9.CT arrangement
10.terminal arrangement
11.vector group
12.connections
13.weight of transformer
14.weight/quantity of oil
15.untaking weight(with bell cover)
16.untaking height(with bell cover) and wid HV bushing
17.transportation weight
Is This Answer Correct ? | 2 Yes | 0 No |
Answer / ronak dadheech
for single phase-5KVA,10KVA,16KVA,25KVA
FOR THREE PHASE-23KVA,40KVA,AND SO MORE
Is This Answer Correct ? | 0 Yes | 2 No |
ratings of tfr. are
1500MVA,315MVA,250MVA,105MVA,100/75/50MVA,10/12.5MVA etc.
Is This Answer Correct ? | 1 Yes | 5 No |
How to calculate the actual 3phase power, if the load current of each phase is not balanced
In our plant we have installed new MCC with ELR and CBCT which is detecting some leakage current in the system but it leading to some confusion when to check that in which feeder which is drawing current we put off the whole panel itself but still CBCT detecting some leakage current so can anybody ans me , where i am going wrong or how to detect whether its actual leakage or CBCT malfunctioning.
why total tape position are odd in number in Power transformer ?
what is ratio test?
I am having a 1500 KVA transformer whose secondary current is 2086A and my connected load is 1000 KVA, I am having 400 KVAR APFCR for PF improvement what ratio of CT should i install in LT EB Bus to get optimum PF improvement?
What is proximeter? where it is used and why?
What is generator
I am designing new project sub station with 220 kV / 11 kV, 40 MVA capacity. This project have many recifier sets, which can generate 3rd harmonics. Now I have to select vector group of This transformer. To minimise 3rd harmonics, what care should I take in selection of Transformer Vecrtor group? If it is Y-Y with open Delta tertiary then what should be the rating & voltage of Tertiary Winding?
what is meant by negative half cycle
what is the main different between distribution transformer and power transformer ?
if earthing is not connected to computers any problem ?
What is the difference between reverse power trip & inadvertant trip?