what type of protection and safety req. in the 220kv substaion and area around

what type of protection and safety req. in the 220kv
substaion and area around the substation

Question Posted / samir_prajapati

2 Answers
9740 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

what type of protection and safety req. in the 220kv substaion and area around the substation..

Protection:-
1)Distance prot. relay
2)local breaker back up LBB relay
3)differential prot. relay
4)pole discripency relay
5)trip ckt supervision of sf6 gas relay
6)air pressure monitoring relay

Safety precautions:-
1)remove all vegetation inside yard
2)proper earhing to fencing & gate
3)proper watering & checking of earth pits
4)periodical cleaning of all C.T.,P.T.,etc insulators
5)while opening or closing off load isolators always wears
H.T. gloves
6)while closing isolator ensure that all 3 poles fixed
properly
7)monitoring the leakage current of lightening arrestors

Is This Answer Correct ?

9 Yes

0 No

what type of protection and safety req. in the 220kv substaion and area around the substation..

Answer / raman jain

Always wear industrial safety halmet.
Don't raise hands.
don't use umbrella in rainy days.
always go with one collouge.
don't walk on tranches.
never operate isolators with out wearing hand gloves.
and rest is GOD.

Is This Answer Correct ?

10 Yes

6 No

Post New Answer

More Electrical Engineering Interview Questions

how to calculate power loss cost of aluminium conductor and copper conductor?v=500v.i=100A.x-section area=68mm.squre conductor

1 Answers

what is excitor response of an excitor?

1 Answers

how do skin effect is reduced when hallow cond or stranded cond are used ?

1 Answers

What should be the dielectric strenght value of transformer oil of 11/0.433KV distribution transformer and 33/11KV tranmission transformer ?

2 Answers

How many double suspension hardware fittings are required on a double circuit transmission tower?

0 Answers

1. What are the types of Transformer?

1 Answers Valdel,

What are the parts in a inverter?

0 Answers

What is the function of the circuit breaker failure relay?

0 Answers

How will you calculate the correct KWH value if your CT is 600/5 and your KWH meter is rated for 100/5

1 Answers L&T,

In case of a synchronous generator carbon brushes, some brushes expire before the others. Why is so? When all the brushes are installed at the same time, why don't thee expire at the same time?

1 Answers

HOW WE CALCULATE CURRENT IF THERE ARE NOT PRESENT ANY AMMETER OR MULTIMMETER??????

0 Answers

whay we used silica gel in Transformer

3 Answers

For more Electrical Engineering Interview Questions Click Here