Answer / somdatt

Lenght of the Cable, Under ground/ Over ground, Insulation
type, also required to calculate approx loss

some times voltage does not built in small generators why ?

2 Answers  

---

We have a 62.5 KVA DG with Leyland engine and kirloskar slipring alternator. We have earthed the neutral, and another earthing for the dg body. is it necessary to isolate the dg foundation with rubber pads?

1 Answers  

---

In case of salient pole alternator when number of poles are 4 or more than 4 it helps the flux wave to be sinusoid as air gap length is increased from center to tip , but if the number of poles are 2 how does the flux wave is sinusoidal?

0 Answers  

---

why ct's&pt'S out put called as burden,why compelsary short ckt the secondary of ct's while removing the burden?

0 Answers  

---

can anyone give an idea about dia calculation in cold rolling mill

0 Answers  

---

How to assume answer to electrical questions

0 Answers  

---

What are the site acceptance tests for power cables, DG Sets, LT panels & 30kVA UPS ?

0 Answers  

---

WHY IN THREE PHASE CABLE 440V CURRENT FLOWS IF IN ONE PHASE 230V CURRENT FLOWS ???

3 Answers  

---

How regulator control the fan speed?

4 Answers  

---

During Testing of Maintenance Free Earthing, How deep should be the Spikes of Earth Test Meter should be inserted in the soil(one spike is 15 Meter & Other spike is 30 Mtrs away from the Main Earth Electrode. Because, recently, we observed that when spike is inserted 3-4 Inch in the earth- results are better, If spike is inserted 1 feet deep than results are increasing.

0 Answers  

---

What is emperical relation.Name few of them which are used in electriacl engineering?

1 Answers  

---

In 1000KVA Transformer why does we connect HT with delta connection and LT with star connection.Illustrate by showing formula?

4 Answers   Tata Motors,

---