what is the abbreviation for F.M In FM-200 fire suppression system
Answer / issam
1- http://acronymsandslang.com/definition/7711804/FM_200-meaning.html
2- http://acronym24.com/fm-200-meaning/
FM-200 Meaning - What does FM-200 mean?
FM-200 meaning is Firemaster / Fire Master 200 and other full form of FM-200 definition take part in below table. There are 1 different meaning of FM-200 acronym in the table which are compilation of FM-200 abbreviation such as IT Terminology etc. terminologies. Unless you can not find the meaning of FM-200 acronym which you look for in 1 different FM-200 meaning table, please search again as using question model like “What does FM-200 mean?, FM-200 meaning” or you can search by typing only FM-200 abbreviation in the search box.
Meaning of FM-200 acronyms are registered in different terminologies. Especially, if you wonder, all meanings belonging to FM-200 acronyms under a terminology, click related terminology button at the right side(bottom for mobile phones) and reach FM-200 meanings which recorded to only that terminology.
Is This Answer Correct ? | 0 Yes | 1 No |
What is the formula to find out two phase active & reactive power
in an open circuit. test there is no load curent.. but secondary. ia open then no urrent have to flow but there a smaller current flows why?
What is reactance? what is the function in Auto transformer and why high leakage reactance?
how r charge carriers produced
purpose of breaker contact multiplication relay?
State and define ohm’s law?
What is BKW of Motor. And what its significance
why transformer rating is always in KVA
Sir we have 12.5 MVA(110/11KV) transformer (Y-Y) connected,which tripped showing earth fault,when we charged transformer it stood OK ,but on connecting 11 KV feeders it tripped showing earth fault.our service engineers found that the B phase and R phase phase connecting to neutral broken from HV OLTC(on load tap changer),and R phase and Neutral is ok.Dissolved gas analysis shows that accetline content is high,tan delta value is 12.My dout is it is an internal fault of transformer,why REF or diffrential relay is not acted?
can a 150 kva 3 phase 440v/230V delta-wye step down transformer can be use as step up transfoermer with connected loads at 440v side?
What is the capacity of the Fastners 12mm?
1.What is the proper definition of power system stability? 2.some times a blue spark is visible in the secondary side of a distribution transformer at the contact position of bushings and fuse wire,why?