Can we use shunt trip coil instead of trip coil with protection relay for protection?
No Answer is Posted For this Question
Be the First to Post Answer
In a three-phase full converter, every SCR conducts for a.60deg. b. 120deg. C.180deg. d.90deg
State the difference between Surge Arrester and Lightning arrester,Both are same or not?
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
What is the reason of using bus-bars on the secondary on the LT transformers?
what is ac servomotor??
some basic standard questions on transformer.
Is motor current is dependent on load.
Explain in brief description about the operation of DG sets.
Power factor =1.000 at factory in supply. However, PF = 0.8 at motor end. Current = 100 Amp, Voltage = 400 V. What is the power distribution loss? Can I reduce it by adding capacitor at the load feeder?
Current Transformer's star point must face the protected object for the relay operation?
placing earthing pit in pathway is correct or wrong??. placing earthing wireGI1/18 inside walls is correct or wrong?. explain!!!
How to calulate cable size for 200KVA,160KVA& 40KVA load?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)